Sorry for yet another wheel question. I am about to purchase a set of American Racing Chamber w/ Teflon (series 3985) 18x9.5 wheels with BFG A/T KO 285/65/18s. On American Racing’s site, they have 2 part numbers listed with the same offset and backspacing (3985-89538 + 3985-89583). The offset is -19 and the backside is 4.5. I have a call into AM to see what the difference is—I’m guessing it might be the center bore dimensions. The BFG’s will have an overall diameter of 32.7 and a width of 11.5. My question is with this offset and backspace, will the rims be recessed behind the fender or protrude out? I see that another VX member has the AM Victor wheels, so I’m sure these rims will fit, but I was unable to get any specs from her. My VX is not lifted and I’m aware that the cladding will need trimmed…THX for any help!