Step Bars assembly

[cyronman]

How did you get the bolt out to replace it with a longer one?

I'll ask again...

[tom4bren]

I am in the midst of installing a set myself. It only takes an hour to do the whole thing (I've had mine on and back off 3 times already). The problem I'm having is that I have 33x12.50 tires and they rub when in a sharp turn. I started with just trimming the brackets and lengthening all of the adjustment slots but it's not enough. When I get the time to be more creative, I'll post the end results but it will probably require custom brackets.

The only tip I would give is that you'll have to lift the carpet (both front and rear because the body mount bolts will spin when you remove the nuts for the installation). Remember that the large bolt on the front and rear of the tube that connect it to the brackets has a slot for adjustment. You will probably have to loosen them to adjust the spacing of the brackets so that they line up with the body mounts.

Hope this helps. Good luck.