Fuel Pressure Regulator

[rowhard]

Hey Uncle, I sent the workshop and electrical manual you sent me to Moncha for uploading here. It's under downloads/manuals. What are the other documents you have listed here?

[uncle_asa]

Hey Uncle, I sent the workshop and electrical manual you sent me to Moncha for uploading here. It's under downloads/manuals. What are the other documents you have listed here?

I'm not sure about US, but in Russia we have ability to request parts by factory part number, so Isuzu Electronic Parts Catalog (EPC) is very usefull here. And also it gives you a tip on whether some parts could be bought splitted or only assembled (gaskets, motors, etc).
Probably there no more other manuals related to VX directly, but there Workshop Manuals for Troopers and Rodeo/Amigo. So, if someone wish to install manual hubs, for example, he might get a tip on how that done on Trooper

[JHarris1385]

Update: Could not for anything get those bolts off.

SO instead I decided to paint the honey comb on my grill white. And my cladding screws silver. Pics comin soon.

Any suggestions of what to do with those bolts? Or how else to get that FPR out?

[Knigh7s]

Craftsman 15 in. Flex Handle 44201 - Cant imagine life with out it!



Hex Bits - These are several more examples. Checkers or Autozone carry them as well for pretty cheap.

[Ldub]

Would anything like these be of use?

Craftsman 15 in. Flex Handle 44201 - Cant imagine life with out it!



Hex Bits - These are several more examples. Checkers or Autozone carry them as well for pretty cheap.

[spaceCADETzoom]

Yep. Bought one at the suggestion of a previous post in this thread. No dice.

THe bit is too long. THrough a lot of effort I might get everyting IN there....but theres no room for the bolt to loosen/turn. My best headway came from hammering the end of an allen wrench. But the bolt is now turned to a point where the allen wrench can only be oriented in a way that I can't easily hammer.

[Ldub]

Hmmmmm ...PB blaster?