Fuel Pressure Regulator

[JHarris1385]

Nice diagram, where did you pull that from?

I gave up on it for now going to try tomorrow maybe the pb blaster will soak in more by that time.

I almost busted the allen wrench trying to lossen it.

[Ldub]

Nice diagram, where did you pull that from?

I gave up on it for now going to try tomorrow maybe the pb blaster will soak in more by that time.

I almost busted the allen wrench trying to lossen it.

For the diagram, check the right sidebar under "downloads".

Go to Sears & get a set of 3/8" drive metric allen wrenches (that fit on a ratchet) if you haven't already...they work tons better than the cheapo L shaped ones.

[uncle_asa]

Nice diagram, where did you pull that from?

It is from Isuzu EPC which is normally used in the shops to identify part. You can get a copy of it from (4 files):
http://rapidshare.com/files/17016667/howto.txt
http://rapidshare.com/files/3522739/..._epc.part3.rar
http://rapidshare.com/files/3511727/..._epc.part2.rar
http://rapidshare.com/files/3494986/..._epc.part1.exe

Other very usefull documents:
Workshop manual (the best source to know how to unscrew something, I prefer it to the s/w from Tone): http://rapidshare.com/files/17008740/IV00.01.pdf
Electrical Troubleshooting Manual (the one that was distributed by nfpgasmask in paper form, scanned): http://rapidshare.com/files/17003942/ETM_VX99.pdf

Some other Isuzu related software/documents: http://rapidshare.com/users/OSBSEO

[rowhard]

Hey Uncle, I sent the workshop and electrical manual you sent me to Moncha for uploading here. It's under downloads/manuals. What are the other documents you have listed here?

[uncle_asa]

Hey Uncle, I sent the workshop and electrical manual you sent me to Moncha for uploading here. It's under downloads/manuals. What are the other documents you have listed here?

I'm not sure about US, but in Russia we have ability to request parts by factory part number, so Isuzu Electronic Parts Catalog (EPC) is very usefull here. And also it gives you a tip on whether some parts could be bought splitted or only assembled (gaskets, motors, etc).
Probably there no more other manuals related to VX directly, but there Workshop Manuals for Troopers and Rodeo/Amigo. So, if someone wish to install manual hubs, for example, he might get a tip on how that done on Trooper

[JHarris1385]

Update: Could not for anything get those bolts off.

SO instead I decided to paint the honey comb on my grill white. And my cladding screws silver. Pics comin soon.

Any suggestions of what to do with those bolts? Or how else to get that FPR out?

[Knigh7s]

Craftsman 15 in. Flex Handle 44201 - Cant imagine life with out it!



Hex Bits - These are several more examples. Checkers or Autozone carry them as well for pretty cheap.

[Ldub]

Would anything like these be of use?

Craftsman 15 in. Flex Handle 44201 - Cant imagine life with out it!



Hex Bits - These are several more examples. Checkers or Autozone carry them as well for pretty cheap.