Quote Originally Posted by MSHardeman
I think I understand the taping into the brake light part, but I don't understand how you get the lights to stay in the reflector holes. I got the round LED lights, the rubber grommets, and the special little connector to hook into the back of the LED's. Do the lights just friction fit into the holes with the rubber grommets? There's no bolt, or anything else, on the back of the LED's except the adapter connection and I'm a little confused.

Any help would be appreciated.
Yup, friction fit with the 2" rubber grommets. You could add a bit of silicone to firm them up. If mine fall out, I'll let you know. I also trimmed a bit off the rubber grommet "front lip" to get it to fit more recessed with less bunching-up. The trick is to also cut the new hole the right size so the grommet will bind just right. I can't remember what dia., but if you get the grommet- use some calipers to measure the hole size you need. Good Luck.

Here's a helpful post if you haven't seen it yet:
http://www.vehicross.info/forums/sho...?threadid=9338

It's a fun mod!