Question about shifters...

[djkymar]

Hi gang!
Well i decide to change my shifters and i got one questions is there any specific sizes or something that i need to know like would any of those shifters for automatic tranny fit VX?http://www.cardomain.com/shoplist~b~RAZO~t~Shift+Knobs
thanks in advice

[djkymar]

i know there is some people from here who got their shifters changed, please help

[etlsport]

pretty much anything will go on the 4wd shifter, its got standard threading for a manual shifter... i know a lot of people have used the razo ra94 for their auto... i used an autotechnica shifter for mine, but had to modify it quite a bit to make it work... but i love the way it looks... got my 4wd shifter from ebay

[Raque Thomas]

As was mentioned above, an off the shelf unit will work for the 4WD, I think I bought mine at Pep Boys. My trans knob is from an axiom, and took quite a bit of work to make it fit. This picture was taken before I shortened the shift lever from the transmission to make the handle trim ride down flush with the cover around the bottom of the lever. I believe most of the shift knobs made for an automatic with a "push to unlock" feature will work.

[djkymar]

alrite about 4wd shifter i knew it, am asking about auto tranny shifter because they have like 10 different styles and they all for auto tranny so i was wondering if they fit or do i have to modify them and if yes then how difficult to modify them?

[etlsport]

depends which ones you are looking at, the shaft that comes up is just over 1/2" the shifter i bought had a 1/2" collar.. which of course didnt fit, so i had to bore it out.. i stepped it up to 9/16 and that did the trick, not a perfect fit, so there was a hint of rattling, but a quick coat of e-tape around the shaft fixed that problem. posting links to the shifters would help figure out if it will fit or not, it really comes down to how much work you want to put in.. you can make just anything fit if youre willing to put in the wrench time

also keep in mind that theres that square collar over the shaft, so unless your shifter fits over that, youll have to remove it, which leaves the shaft exposed (which is pretty ugly) or let your shifter rest on it