Well, from the looks of your avatar, it seems there might be some water in there!!!
Sorry, I'm not much of a help...
Bart
Originally Posted by zadam123
Well, from the looks of your avatar, it seems there might be some water in there!!!
Sorry, I'm not much of a help...
Bart
Originally Posted by zadam123
i would recheck the connections and ensure that the bulb's 3 prongs are completely 'covered' (connected) to the harness.
may, in fact, be the bulb itself. the filament may be lettin' you know it's time for a change.
-jose
2001 kaiser silver #1002
the bulb filament is probibly broken, tapping makes the broken ends touch breifly making a cuircut.
I would try replacing the bulb. try the bulb from the other headlight if you want to check the wires before spending money on a new bulb.
warning= do not touch bulb with bare fingers.
Agree with the filament. Just changed mine....easy.
Bim
I had the same problem with the light in my horn in the headlight, honestly I didn't even notice there were separate mini-lights up there anyway until a week or so after I had my VX, however, it is easy to replace and I went to Pepboys for my bulb, if you are referring to your actual low beam headlight and not the horn then I imagine that should be pretty easy as well
have to agree with the filiment thought.
david