big meat vx...

[pbkid]

hmm thats kinda depressing to hear that you think that an SAS would be cheaper and more practical...it was sounding like this type of lift just took a lot of customizing and research...guess ill have to keep saving =(

[nfpgasmask]

Pardon my ignorance, but what the heck does "SAS" stand for? I always say "SAS" when I am walking the mall with my wife, but in my case it stands for "Sweaty *** Syndrome". So, in regards to 4x4 build ups, what is a "SAS"??

Sorry again, but I just gotta ask cause it doesn't make sense contextually with my abbreviation.

Bart

[Ldub]

Solid

Axle

Swap

[Triathlete]

PB
You may be surprised. The SAS may be cheaper than all the "custom" stuff. One-off's can cost mucho dinero $$$$$$$$$$$$$. For a linked SAS you basically need an axle ($200-600 at u-pull lots), some tubing for the links, joint end of some sort, mount brackets, shocks/springs and a steering set up. If you have a local 4x4 fab shop swing by and talk to them. They can probably give you a rough idea of cost. If you plan on running the big meats the SAS is definately the way to go...unless of course you like trail repairs!

[kpaske]

pbkid -

The problem with lifting the VX even a couple of inches is that it places the CV joints (front half axle) at a sharper angle than they were designed for. There is all sorts of information posted here about how to compensate for that, including purchasing custom diff drop brackets, but it's best to understand early on that the VX suspension is fairly limited in how it can be modified without replacing major components.

Everyone considering a lift and bigger tires should also be aware that the consequences go much further than torn CV boots. Neither the tranny nor the drivetrain were designed to accomodate tires larger than 30". Lifting your VX and putting on 33" tires will seriously decrease performance. Getting it back requires major modifications, such as a gear swap (for which parts are extremely rare) and a supercharger or engine swap.

If you're going to go through all the trouble and expense to modify your suspension and drivetrain, it might be wise to consider whether an SAS would be the better solution. I'm assuming that Big Meat's custom work was to lift the body, because there isn't much more that can be done to the suspension that hasn't already been done by many (besides an SAS).

SAS = Solid Axle Swap. It basically entails replacing much of the front suspension and both axles with something beefier. Most of the parts should be easily obtainable from older Isuzu/GM trucks from the junk yards, but I'm sure it would require a good deal of custom welding. When SPAZZ comes back around he'll probably chime in with all sorts of good details on how to do this (or search some older threads).

[nfpgasmask]

Danke...

Bart

Solid

Axle

Swap

[pbkid]

ok, well that helps out. im just finding that the only limitation for the VX is its height and getting caught up on stuff..so i was thinking with lifting it more it would be pretty unstoppable, not to mention badass looking =). i dunno maybe its not workable for a few more years but i still have visions of one with a 6 inch lift, 36' tires, and exo cage...

[ZEUS]

Actually, the best rig to look for solid axles to donate to the VX is the Jeep Cherokees and Wagoneers. The widetrack, passenger side drop Dana 44 front axle is what works. The good news is these rigs have the same lug pattern as the VX so in all reality all you need to swap is the front axle and rear ring and pinion. 5.38's are the gears to look for swapping in since you can get them for D44's and for a limited time you can get them for our rear axle. 5.38's would work well with 35" tires as well. Independent 4x offers an SAS kit that includes all sorts of goodies to get the job done but expect to acquire more than what they offer. Another benefit of the SAS is the strength and practicality of the selectable hubs on Dana 44's and aftermarket parts up the yin yang!

[Triathlete]

Another thing to consider is that IFS doesn't allow for much flex (thats why so many pics with a wheel in the air). With a properly designed SAS you can get incredible flex. 4 tires on the ground get better traction than 3 or 2!

[pbkid]

dana 44's come off of old toyota's correct? i believe my 87 pickup had 44's on it...so if i could get ahold of an old toyota with a blown motor for cheap then i could steal most the parts needed?