Quote Originally Posted by Ldub
OME 912's give lift of about 2" or a little more & are single rate.
They are about the same length as stock springs(with no load), just made of heavier ga. material.
I know you don't want spacers, but that would seem the most economical solution. Also, cutting the rear bump stops in half vertically improves the ride a little.
I'm going to replace springs anyway, so spacers are not the option. The options are: VX stock, OME 913, Trooper stock and OME 912. Cutting rear bump stops also will not improve clearance Just wondering what would be the best for my case (31.7" wheels in full diagonal crosses).
I believe for the 265/75R16 the rims should be with ET20 (the formula I used is 38-(265-245)/2-((265*0.75-245*0.70)/2)*sin(pi/4)~=18, round to 20 )