... or so it seems. Mine squeaks like mad, exactly as you say, at slow speeds. I think it probably squeaks all the time, but I can only hear it when I am going slow.
Is it easy to replace the sway bar bushings?
Bart
Super VXer
... or so it seems. Mine squeaks like mad, exactly as you say, at slow speeds. I think it probably squeaks all the time, but I can only hear it when I am going slow.
Is it easy to replace the sway bar bushings?
Bart
Super VXer
http://www.vehicross.info/forums/sho...02&postcount=1
here is the thread with the part numbers/info about the sway bar bushings... anyone have additional info on these? (such as maintence, difficulty of installation etc)
Super VXer
Simplest install ever! There are so few zerk fittings on the VX, getting the greasable bushings will more than double the points for lubing. I have had mine on for 2 or 3 months and haven't needed to grease them since I installed them. Grease them as you are putting them in, bolt in place of the existing sway bar mounts, and you are done. Get a grease gun, and you can lube them yourself at every oil change. Of course, those squeaks may be coming from different places though.
Sent from my "two hands on a keyboard"
Super VXer
Another place known to be a squeak factory, is the hood catch (the metal loop in the hood that engages the release mechanisim)...cover the area that makes contact with duct (duck) or electricians tape, then test drive to see if that was it...then put on your thinking cap & come up with a more permanent fix than tape.
Super VXer
Thanks for the help guys. I will try the rubber hood bumpers and hood latch angles first. I did just have the hood latch worked on as it wasn't opening anymore.
I also tracked down the website for Moncha's bushings as well in case I need to go that route. Never replaced bushings myself though. I take it by reading other people's quotes that it's very easy. I'm guessing most of the work is mustering the will to try it and the strength needed to unlock some rusted bolts.
Super VXer
One way to temporarily fix the sway bar squeaks is to lube the robber bushings with silicone spray. Works fine for simple road use.
Super VXer
joe, where did you find the bushings that Moncha used to offer at? i havent looked very hard, but if you already have the site would you mind posting the link? my vx doesnt squeak.. but i like the sound of the handling performance improvement from them
Posting Permissions
Reply With Quote