Well I guess my baby was feeling left out, because out of the blue the CEL just lit up right after starting the engine this evening. I took it down to Autozone for a read, and this is what it was showing;

p0135---malfunction in the heater circuit for o2 sensor 1 in bank 1.

p0141---malfunction in the heater circuit for o2 sensor 2 in bank 1.

p0155---malfunction in the heater circuit for o2 sensor 1 in bank 2.

p0161---malfunction in the heater circuit for o2 sensor 2 in bank 2.

I did a little searching but most of the info was related to voltage issues concerning the o2 sensors. Any ideas if this is a false reading or should I start looking for the replacement sensors? Also does anyone know if the "heater circuit" is part of the o2 sensor?

I am about to start looking through the downloadable vx manual but thought I'd throw this out there in case someone has already been down this road. Also i wasnt able to see if the codes are recurring since Autozone would not reset the codes. Guess I'll have to find a different place for that.