Printable View
Anyone have any of these laying around? I snapped one off while putting my rear door cover back on. I've tried ordering from St. Charles Iuzu 3 times now and Isuzu keeps sending me the grey colored screws (something supposedly wrong with the part numbers and how the supplier packaged them). I'm going to keep trying through them, but thought someone might have 1 extra laying aroung that they would be willing to sell!!!
i got an extra one bro, i snapped one off when i first got mine.. you can imagine my frustration then...
so i got two. Fair exchange, send me a grey one with a return package for the red one.
Send me an email at jungalbutt@yahoo.com so we can set things up
make sure to metnion it in the subject so i dont just delete it as junkmail...
L8tr
Thanks a lot man!!!! Just sent you an e-mail.
Now that is good times ... Friends helping friends ...I feel emotional:cryg:
one of mine also snap in two...anyone else have another??????:(
I have a bag of 4 red knobbies.......however I can't bring myself to get rid of any...the way they snap in two I think I'm gonna need em!
Got mine from St. Charles....had no problem!!?
You don't happen to have the part number that was shipped to you? It would be worth while to post in-case anyone else has these issues. Merlin @ St. Charles was trying to explain how the part numbers for the two different colors are wrong, and got switched on the packaging. Someting like this anyway. I guess it's a real mess, but you may be able to help.
Jungalbutt, did you get my e-mail? I'll try to PM you.
mah bad on the response.. i'll try to find the part number and post it.
Description Notes Isuzu P/N
Knob, tail gate red 8-97198-691-0
Gasket, Intake manifold 2 rqrd 8-97237-538-0
Pin, guide for front calipers 2 per side 8-97160-820-0
Stud, Exhaust pipe 3 per side 8-97115-132-0
Cubby, storage replaces CD 8-97129-980-0
Rear ABS sensors & harness both sides 8-97110-076-3
Ash tray 8-9715-6094-0
Center console lid 8-9715-7090-1
Center console lid (thick) 2-90119-900-0
Fuzzy Hole replacement switch bezel 8-9710-7569-0
Tailgate Release switch (from 95.5-97 Rodeo) 8-97093-960-3
Foglight switch (from 98-newer Rodeo) 8-97125-279-2
Block off plates (Switch Blanks) 8-97081-617-1
I wouldn't mind getting extra spare tire cover for my rear door.
Maybe you have part number for that, Tone?
Or is it unreachable?
Anyone?
My problem are the receptacles for the Knob ( black)- Have broken all 4. Ordered 4 new ones from Isuzu got 1 which was wrong part & sent to wrong address.
Bob F
A half inch wooden dowel fits in side the knob just cut to length and glue in. This keeps it from braking and can fix a broken one
1999 = 8-97198-962-1Quote:
Originally posted by yal^
I wouldn't mind getting extra spare tire cover for my rear door.
Maybe you have part number for that, Tone?
Or is it unreachable?
Anyone?
2000/01=
blk/grey 8-97292-592-1
blk/red 8-97198-962-1
price listed is $159.45 (as of Sept 2002 Mitchell book) and comes with the screws/knobs
The knobs are listed as follows:
gray= 8-97198-691-0 (as Tone said in his email)
RED = 8-97292-598-0
priced at $2.75 each
the receptacles that these screw into are:
8-97161-992-0 pkg of 4 = $3.68
The RED ones I have in my possession have the p/n 8-97198-691-0 on the bags they are in- the same as what Merlin told me when I ordered them.
Not sure what gives - the guide lists the other part number for red??? Probably why everyone is having a hard time getting the correct part!
If anyone has an extra 1 or 2 of the red knobs I would be happy buy them. I just snapped one of mine last week. Must be an epidemic.
If you have the pieces to the broken "screws", you can fix them VERY CHEAPLY and have them NEVER break again!
I just broke two of mine last week too. To fix them, I went to Home Depot and bought 4 (I fixed the unbroken ones too) metal, tubular "Spacers" to reinforce the inner bore of the plastic screws. You'll find them in the specialty parts area of the hardware section. The spacers are about 2" long and the outer diameter is a PERFECT fit to the inner diameter of the screws! So, if you slide the spacer into the broken (handle) part of the screw, and slide the smaller broken piece over the rest of the spacer (superglue the spacer into the bore), you'll have a perfectly fixed and reinforced screw that'll never break again. And, yes... the metal retainer clip will still work!
I think I spent less than $1 on each spacer, plus $1 for the Superglue.
Hope this helps!
Raque Thomas: thank you :flower: