Parting out rolled 2001 Kaiser

Printable View

08/30/2017, 01:56 PM
gonzo7231

Parting out rolled 2001 Kaiser

I am parting out a rolled 2001 Kaiser. Engine/tranny are gone as well as front seats. Everything else up for grabs. If you are looking for anything ping me and I will let you know for sure if I have it.

I considered doing a chop top since that's the majority of the damage but that idea was beyond the time I have to devote.

I will post some pics as soon as I can.
08/31/2017, 11:53 AM
ipd

Oddball question. Do you have the "Isuzu" emblem that sits on the center of the airbag? I'd like to try affixing it to a JDM airbag, instead of the stock JDM Isuzu logo.

If the airbag did not deploy, please disregard.

Thanks!
08/31/2017, 03:20 PM
Thelgord

Speaking of logo's, what badges do you have?
09/01/2017, 12:09 PM
dietz99vcross

where are you located?
09/01/2017, 03:52 PM
Thelgord

Harlem, GA
09/01/2017, 04:03 PM
ipd

LOL^ i think he meant the OP.
09/01/2017, 04:10 PM
Thelgord

Probably, but with an open ended question .. LOL!
09/02/2017, 11:13 PM
alo247

do you have a good hood
09/05/2017, 10:12 AM
Tarek

Hi, Window Regulators L&R, and working Fuel Sending Unit? Thanks!
09/05/2017, 10:32 AM
gonzo7231

Quote:

Originally Posted by ipd

Oddball question. Do you have the "Isuzu" emblem that sits on the center of the airbag? I'd like to try affixing it to a JDM airbag, instead of the stock JDM Isuzu logo.

If the airbag did not deploy, please disregard.

Thanks!

Sorry the airbag did not deploy.
09/05/2017, 10:33 AM
gonzo7231

Quote:

Originally Posted by dietz99vcross

where are you located?

I am located just north Of Dallas Texas.
09/05/2017, 10:36 AM
gonzo7231

Quote:

Originally Posted by alo247

do you have a good hood

The hood is solid and as far as I can tell isn't twisted. The passenger side where the hinge mount is located got bent in the roll but I think it would straighten with little effort.
09/05/2017, 10:40 AM
gonzo7231

Quote:

Originally Posted by Tarek

Hi, Window Regulators L&R, and working Fuel Sending Unit? Thanks!

The driver side door is complete and unharmed. The passenger side is where the crush is. The window was rolled down at the time so it survived which would lead me to believe the regulator did too. As far as I know the fuel sending unit survived as well.
09/05/2017, 02:44 PM
litlbear

Do you have Isuzu emblem from the grille?
09/05/2017, 07:17 PM
Thelgord

I am looking for badges, if you still have any, and I could use the front lower turn signal covers. Also, interested in door handles and the driver door panel if they are in decent shape.
09/20/2017, 07:51 AM
Lancelot

Looking for sun visors and the associated clips. How much do you want for both sides?
10/14/2017, 03:07 PM
Tarek

Hi Gonzo7231, I am interested in the driver side window switches if they are still available. Please let me know how much, shipped to 10026. Thank you! Tarek
10/30/2017, 10:24 PM
eternal21

Passenger's side headlight? A VX owner from Tasmania hit me up on social media, and I told him I'd help him find one.

Thanks!
10/31/2017, 11:18 AM
MSHardeman

Does he have a JDM or a US model VX? I think the JDM headlights are different from the US model headlights. On top of being built differently, the JDM headlights are calibrated for driving on the left-hand side of the road.
10/31/2017, 05:10 PM
ipd

I thought you could adjust aim/focal point on those? Most projector lights you can.
10/31/2017, 05:19 PM
MSHardeman

That's just it, I don't think that the JDM lights are projector lights. It looks like they use a conventional headlight bulb, but I could totally be off on that as I have never seen one in person.
11/01/2017, 03:18 AM
ipd

Unless it's a sealed beam bulb (think a giant, square shaped bulb), then it's a projector. My 1995 mitsubishi GTO has projectors & you can adjust their aim.
11/01/2017, 11:56 AM
MSHardeman

That's it. Couldn't think of the terminology. I THINK the JDM headlights are sealed beam bulbs. Kind of looks like that on all of the pictures that I have seen.

Could someone with a JDM verify what kind of headlights you have?
11/01/2017, 01:52 PM
ipd

I'm telling you, they're not sealed beam. JDM vehicross have the same style of projector housings that the USDM ones have.

https://i.ytimg.com/vi/AnTLcqLwvLw/maxresdefault.jpg

This is a sealed beam projector bulb being changed on a C3 Camaro.

https://i.ytimg.com/vi/eEu0W4h44Ec/maxresdefault.jpg

This is a JDM Vehicross. Same projector housings that USDM uses. Both of these use standard, xenon-type projector bulbs, not sealed-beam projector bulbs.
11/02/2017, 02:32 AM
PK

The JDM bulbs are a "H4" halogen bulb - definitely not a projector unit.
The difference between JDM and USA market headlights, is that the glass lens in front of the bulb (not part of the bulb) has a bias for light deflection to the off side of the road. In this sense if a US market light is installed in a JDM vehicle, the light is deflected into the oncoming traffic, and no amount of adjustment will rectify this.
It is in fact illegal to drive the vehicle on the road in that case.

Now I have another question - since about 2009 I have owned the only VX in Tasmania, so who is this guy chasing a headlight???

PK
11/02/2017, 08:10 AM
MSHardeman

Thanks for clearing that up PK.
12/07/2017, 06:11 PM
Tristan

Do you have the silver fangs for the front grill?