Printable View
My local garage is fitting these to an Ironman...right now.
http://surtrack.biz/external?url=htt...ycarparts.net/
(Wait a couple of secs, then click Isuzu..then VX..)
Impossible to tell if they are tripod bearings or ball without taking them apart...
...and the garage guys didint thinks that was a great plan!!!
Anyone know...?
Anyone heard of them...?
I'll call them Monday, just thought I'd throw it out there given axls/shaft/cup/bearings questions.
Jo
Jo, just from some quick search...
Chinese made, look to cost anywhere from $45-75, there site really doesn't give much info which makes me a bit leary, claims to be reverse engineered from oem, could find no real world reviews.
Thanks Billy.....
....I know the cost, and I've seen them....played with them at the garage.Quote:
Originally Posted by Triathlete
( they called me for advice!! )
My question is..without taking them apart..does anyone know the bearing set up in the cup..
..and has anyone used them...and can give feedback on how they perform.
They look OK ( cup is silver, not green!)..but looks can be deceiving .. :eek:
I'll follow up with the company Monday..just wanted fast info, if available from folks here!
Jo
Will be interested to hear what you find out!
Me too.....
If they are ball race ( as OEM) and not 'tripod roller' bearings ( binding issues when lifted.). ......Quote:
Originally Posted by Triathlete
...and they dont have the "smaller balls" issue ( :eek: ) .... that the EMPI brand does...
..maybe they are a good find.
We shall see.
jo
If you look on their site, the photo of the complete axle without the green cup does show a 6 ball setup.
Not sure of the diameter or the quality.
PK
Good catch PK...
...I was fixated on the whole assembly.Quote:
Originally Posted by PK
You're right..thats not a tripod bearing.
Now..if it's OEM style...
...we might have something.
:thumbup:
jo
Maybe a few of us could chip in to buy one for an autopsy. That way no one is throwing away a wad of cash.
I'll get in touch with them this week...
...and ask about the ball bearing size etc.Quote:
Originally Posted by RabidPony
If it all measures up to OEM ( not Empi ~small!)..
...I'll order a set and bring them to Moab for general inspection.
Anyone have the exact overall length of full OEM assemblies for either side......?
Jo
PK...the only problem is most sites like that show a generic pic of one of their shafts for all applications and not a pic of that specific shaft so they could differ when you actually get your hands on one.
What I know...
EMPI
http://images10.newegg.com/NeweggIma...9124261188.jpg
Rzeppa = :thumbup: - for trooper rzeppa cups
http://images10.newegg.com/NeweggIma...9124261607.jpg
Tripod = :thumbdn:
Hope for the best, expect the worst. :_confused
Jo, I have a complete driver side axle as a spare. If you need me to measure it let me know.
Yes please Mark!!
If its an original OEM ...Quote:
Originally Posted by MSHardeman
...if you can get compressed and un-compresed length that would be awesome!
Thanks
jo
Yep, full OEM assembly. Got it from a salvage yard VX when my driver side green cup got messed up, but ended up not having to use it.
It's buried in my garage and it's beddy-by time here. Hope it can wait until after work tomorrow.
Sweet...
.....anytime its good for you, is good for me.Quote:
Originally Posted by MSHardeman
I'll get the tech details from "SurTrack" tomorrow or Tues...so no huge rush.
Thanks Mark :thumbup:
Jo
Jo, and anyone else who is interested, I dragged the driver side axle assembly out and put a tape measure to it.
Fully extended the axle assembly is 42.5 inches long.
http://www.vehicross.info/gallery/da...xtended_02.JPG
Fully compressed the axle assembly is 41 inches long.
http://www.vehicross.info/gallery/da...Compressed.JPG
To be fully accurate, both lengths are probably an eighth-inch, or less, short. So add a short eighth-inch to the above dimensions to get the exact lengths.
Hope that helps.
Thanks Mark :thumbup:
Now I'm just waiting to hear back from SurTrack.
Jo
Jo, I know that others have done this, but if you need me to tear into the axle to measure things (balls, cages, etc.) let me know. I've been wanting to take the axle apart anyway so I can practice on it before I take mine apart to replace all of the CV boots (probably after Moab).
Thanks Mark...
...go ahead for your own edification!!Quote:
Originally Posted by MSHardeman
I've got all the measurments I need to do a comparison...
...just not getting any replies back from these guys :(
Thanks Mate!
Jo