Side Window Visors

Printable View

03/12/2010, 09:25 PM
momaster

Side Window Visors

I am looking for a set of Side Door Visors by Aerovisor and GT Styling #80126 for my 99' Vehicross they are wider than the low profile ones but is there anyone out there that knows where I can get further info .
03/13/2010, 01:08 AM
Ldub

Dude...it's E-Z...

I just copied & pasted "GT Styling #80126 " into a goog search & found...

http://www.summitracing.com/parts/GTS-80196/

The part # you listed looks like it's for a mitsu...:confused:
03/14/2010, 09:02 AM
yellowgizmo99

says #80196 is one we need
03/14/2010, 09:48 AM
Y33TREKker

When you say you are looking for the ones that are "wider" than the low profile sets, are you talking about the Japanese (JDM) versions that were offered when the VX was first introduced?
03/14/2010, 10:22 AM
JHarris1385

If you are looking for the JDM - good luck. I have never been able to find a source that fully comes through in the end.
03/14/2010, 11:19 AM
Ldub

If you look at the pic in the link I posted, you'll see that the one's they're showing a pic of look wider than the standard vents I've seen before.

http://www.summitracing.com/parts/GTS-80196/
03/14/2010, 12:45 PM
Y33TREKker

True, but right below the picture is also says "Image is a representation of this part. Actual part may vary."
07/19/2011, 08:39 PM
djvx

I just ordered a pair of GT style ones from Amazon, #40196. $42.97 pr. free shipping. no tax.
07/20/2011, 11:41 AM
blacksambo

They don't look substantially different than the weathertech brand vents, do they?
07/20/2011, 12:00 PM
JAMAS

http://www.amazon.com/GT-Styling-401...1&s=automotive

Gussie2000 reviewed them in 2009....
07/20/2011, 12:38 PM
Vendetta

I got the WeatherTech ones last month, no problems at all. They fit just fine of course, but don't do a darned thing to reduce the wind. I can't imagine the GT ones being any different in that respect. They *MIGHT* be a little darker, but it's impossible to tell from the pics.
07/20/2011, 01:03 PM
MustangO4

The only way to reduce the wind is going to be putting a vent of some sort in the back. If only the rear window would go down, like in a 4 runner all our problems would be solved. That is really my primary motivation to remove the back hatch and doors for the summer.

I was also considering a roof vent in the back like in a conversion van.

Like this
http://www.amazon.com/gp/product/B00...VF3RQX3YV635HV
07/20/2011, 02:03 PM
ron

Quote:

Originally Posted by JHarris1385

If you are looking for the JDM - good luck. I have never been able to find a source that fully comes through in the end.

This is a project that I've been meaning to tackle. I had a set on my ex-ebony so I know how they install and can recollect the overall size and shape. I'll be reverse engineering the outter door frame to get basic dimensions to input in CAD and build a surface profile of the jap oem vent visors based on photos and memory. rudy
07/20/2011, 04:14 PM
JHarris1385

Great! I have wanted one for years. There are quite a few others as well.
07/20/2011, 04:43 PM
JAMAS

yarp. I would buy
07/20/2011, 06:50 PM
blacksambo

I would definitely buy as well. They are shown in the JDM accessories glossy catalog. I presume you have access to that brochure? If not, let us know and we'll work something out.
07/21/2011, 03:16 AM
johnnyapollo

Couple of comments as an owner of original JDM visors.

1. They have cut-outs for the mirrors that limit their effectiveness against wind and rain. This is due to the JDM folding-mirror which was not brought to the US (not sure if that was a cost cutting measure or if they weren't "approved" in the US yet).

2. They mount to the exterior via double-stick tape and a small metal bracket (I owned the WeatherTech previously and the installation was actually easier/cleaner).

3. The stick out quite a bit and can sometimes get in the way (I've also hit my head on the edge a few times).

Just wanted to provide some disclosure before Ron goes through all the effort to avoid any backlash. Ron - if you want some detailed measurements and photos let me know and I'll be happy to provide.

-- John
07/21/2011, 05:36 AM
JAMAS

Quote:

Originally Posted by johnnyapollo

1. They have cut-outs for the mirrors that limit their effectiveness against wind and rain. This is due to the JDM folding-mirror which was not brought to the US (not sure if that was a cost cutting measure or if they weren't "approved" in the US yet).

Ummm.....My mirrors fold in.
07/21/2011, 06:02 AM
tom4bren

Quote:

Originally Posted by JAMAS

Ummm.....My mirrors fold in.

Not 'lectric-ly.

IIRC, the JDM mirrors actually fold in automatically when put in park or engine shuts down.
07/21/2011, 06:10 AM
Vendetta

Even though I just picked up the WeatherTechs, I'd be interested if someone fabs a hybrid WeatherTech/JDM style - a wider-flared more organic looking deflector (JDM style) that tucks into the window channel (WT style).
07/21/2011, 06:29 AM
JAMAS

Quote:

Originally Posted by tom4bren

Not 'lectric-ly.

IIRC, the JDM mirrors actually fold in automatically when put in park or engine shuts down.

AAAAHHHHHHHH....now I see.

I make a robot noise when I fold them in. Does that count?
07/21/2011, 06:54 AM
vt_maverick

Quote:

Originally Posted by tom4bren

Not 'lectric-ly.

IIRC, the JDM mirrors actually fold in automatically when put in park or engine shuts down.

Don't think it was that sophisticated, they were controlled by a switch that goes in the blank spot beside your heated mirror switch. Pretty sure you had to do it yourself.
07/21/2011, 06:56 AM
vt_maverick

Quote:

Originally Posted by Vendetta

...I'd be interested if someone fabs a hybrid WeatherTech/JDM style - a wider-flared more organic looking deflector (JDM style) that tucks into the window channel (WT style).

+1 I like the way this guy thinks. :yesy:
07/21/2011, 08:59 AM
pnwdawg

I'm also interested in buying a set
07/21/2011, 09:33 AM
tom4bren

Quote:

Originally Posted by JAMAS

AAAAHHHHHHHH....now I see.

I make a robot noise when I fold them in. Does that count?

UMMMM - sure, but only if you do it every time.

Quote:

Originally Posted by pnwdawg

I'm also interested in buying a set

;puke2; on wind deflectors. If the VX was meant to have wind deflectors & cup holders & roof racks it would've been made by Honda rather than Isuzu.
07/21/2011, 09:46 AM
JHarris1385

Roof racks?

The JDM deflectors are also called mosoon rain deflectors due to the rainy season in Japan starting in the summer (I believe (Juneish)). Don't think it is monsoon levels but more like the PNW.
07/21/2011, 10:19 AM
Vendetta

Cup holders I might understand, but why hate on roof racks? I think a VX looks nekkid without one, actually.
07/21/2011, 10:22 AM
tom4bren

I'm just rattlin' yer respective cages. Although I don't like rain guards/wind deflectors, I don't hold it against you simple minded folks who do.

Heck, I have a set on the RV. In that case it was a necessity. 1-3 gallons of water can come rushing off the roof aimed directly for my left shoulder. The rain guards provide just enough extension to deflect it away.

As far as the monsoon season is concerned ... mine came equipped with these very nice transparent shields that can be elevated to keep all of the water out. I think they are called ... windows.

I don't have anything against roof racks ... it was more of a bash against the lack of availability. Some of my best friends have an awsome rack.

'sides, this thread was getting too serious ... needed some levity.
07/21/2011, 10:31 AM
JAMAS

Quote:

Originally Posted by tom4bren

As far as the monsoon season is concerned ... mine came equipped with these very nice transparent shields that can be elevated to keep all of the water out. I think they are called ... windows.

Are those custom?...Seem pretty fancy to me
07/21/2011, 10:49 AM
JHarris1385

If you look most cars have a JDM style deflector that is MUCH bigger, just like this one. Don't ask me, I have never lived over there.

If the VX was meant to have offset....well....just kidding.
07/21/2011, 11:25 AM
Vendetta

You can never have enough friends with awesome racks!

And back on topic... I got the wind deflectors in the empty hope they'd deflect wind. My AC wasn't charged up yet (remember, the ol' girl sat for three years, maybe longer), and I was suffering through the heat and humidity when I drove the VX instead of my "nicer" car. But having just gotten it back on the road, I'm all about driving the VX these days.

...with AC now.
07/21/2011, 11:59 AM
tom4bren

Quote:

Originally Posted by JHarris1385

If the VX was meant to have offset....well....just kidding.

I have no response to that!!!

C'mon - like you didn't see that coming.:)
07/21/2011, 12:14 PM
ron

Thanks John for the input. Any measurements/pics you can provide would help. Also, I don't recall a metal bracket being used on my visors. Can you take a pics and dimensions of the part? Thanks in advance!

Quote:

Originally Posted by johnnyapollo

Couple of comments as an owner of original JDM visors.

1. They have cut-outs for the mirrors that limit their effectiveness against wind and rain. This is due to the JDM folding-mirror which was not brought to the US (not sure if that was a cost cutting measure or if they weren't "approved" in the US yet).

2. They mount to the exterior via double-stick tape and a small metal bracket (I owned the WeatherTech previously and the installation was actually easier/cleaner).

3. The stick out quite a bit and can sometimes get in the way (I've also hit my head on the edge a few times).

Just wanted to provide some disclosure before Ron goes through all the effort to avoid any backlash. Ron - if you want some detailed measurements and photos let me know and I'll be happy to provide.
-- John