Printable View
I have been looking around for a pair of custom fit diamond tread polished aluminum floormats for the VX, but so far, I couldn't find anyone who made such an item. www.legend5.com has a list of metal floormats for almost any vehicle, except of course the VX. Does anyone know where I can find a set of metal floormats for the VX, or a vehicle on the above website that may closely match the VX?
I spoke to Tom at Legend5, he said that he would add this to his Development list. We can get a discount, but he has to first find the vehicle. They are located (in 914 East Osbourn Rd Unit 218)
Phoenix, AZ 85014. The regular price for a set (2 front & rear mats) is $179, but for Our club/cult $159 including shipping. Maybe someone in the area can volunteer to get fitted.
I would be in for 1 set:clap:
It seems to me that these would be very slippery with wet shoes :)
I think that might be a little 2 high a price. There is a shop near here that I will contact to see how much it would cost to have something like this made. I have 1 question: How high would everyone want them to be? Just the same size as the regular floor mats or all the up under the dash? Let me know. I'll ask to see if there might be some kind of clear coating that could be put on that won't make them slippery and still make them shiney.
If I was to be in, they'd have to be the kind that hold slush and mud.. so deeper ones... not just a flat plate on the floor, I need containment....
I'm with Driver3!
I talked to the shop and he asked me to swing by friday to see what we could come up with. Any ideas everyone could come up with and I'll give them to him and see what we could get.
Regardless of what the design is, it has to put function over appearance... especially at that price. Otherwise, it'd just be a peice of expensive junk.
I am open to ideas. I just thought it would be another nice touch to the VX interior. I was thinking about 3/16in metal maybe with a small lip that goes up to the scuff plate. Kind of the same shape as the stock mats only extending under the pedals up to the dash. I think the passengers side would look good if it went all the way up to the dash too. Like I said before, I will go with whatever we agree on. Please keep posting with any new info as I will be ready to get a set too.
I'll buy a set but how much and do they have them in stock cuz it would look extreme.
then the only thing i need after that is a skid plate by ron and a supercharger and a moon craft body kit and then you guys will see it when its done
Look much much much different then all of yours vx's and i know that bantan saw it before but it different now and if any body that wants to buy it when it is completed email me for a price
;eekb; ;eekg; ;eeko; ;eekp; ;eekr; ;eeky;
I'm not sure if you're trying to be facetious, but saying you want to buy all of those mods to be different, then sell it, is a little strange. Plus, aren't you the person who said you had a Boss 429 in one thread, but is selling a 302 in another? AND... you stated you already had 310 hp in your VX and run 207 mph in the 1/2 mile?Quote:
Originally posted by VX-KING
I'll buy a set but how much and do they have them in stock cuz it would look extreme.
then the only thing i need after that is a skid plate by ron and a supercharger and a moon craft body kit and then you guys will see it when its done
Look much much much different then all of yours vx's and i know that bantan saw it before but it different now and if any body that wants to buy it when it is completed email me for a price
;eekb; ;eekg; ;eeko; ;eekp; ;eekr; ;eeky;
How does a coat of Line-X to keep the metal mats scratch resistant sound?
I like the liner idea, I was just sitting here thinking that I would paint it black, but liner is better, no slippage, plus it would fill in the cracks where the folds are if it's not welded.
Then what's the point in having metal mats? why not just go with a set of McNeil's Weathertech thick rubber mats? They have deep groves to hold water, slush, mud, and whatever else you track into your car.Quote:
Originally posted by Navigator
How does a coat of Line-X to keep the metal mats scratch resistant sound?
Metal is tough as nails, and with Line-X, the mats won't get slippery when wet and scratched up by shoes.
A matte red Line-X finish on mine to match my seats, you can have yours done in chrome if you like, heck it's all theory at this point :D
I don't know. I just can't see the need for a metal floor mat.
I mean why would you need a floor mat that strong? If you've got rust holes the size of basketballs in your floor then... yeah.
McNeil's mats are made of thick rubber. Unless you transport and spill acid in your VX often, those mats are probably going to last to the day you um... retire and then some.
Paul,
I'm sure most of the appeal is the aethetics.. Diamond plate looks pretty hardcore :)
Point was, metal covered with line-x would lose that appeal.Quote:
Originally posted by IsuZOOM
Paul,
I'm sure most of the appeal is the aethetics.. Diamond plate looks pretty hardcore :)
Last time I saw BigMike's ride, he had small diamond metal plates bolted to his floor mats. He told me he got them at PepBoys and they were about $20. You might want to experiment with those before committing the $$ to some custom ones.
-- John
Dallas4u
hey yeah why
r u looking to buy a muscle car for sale cuz my i brought two more muscle cars one is a 1965 ford mustang fastback k-code HiPo and a 1968 ford mustang convertible if you will like pic of the 4 muscle cars that i have email me or reply though vehicross.info
Alex
peace:D ;Do; ;Dp; ;Dr; ;Dy; ;Db;
ALRIGHT VX-KING POST SOME DAMN PICS OR GET THE **** OUT!!!!!!!!!
Best policy towards bozos... ignore them and deny them the attention they seek.Quote:
Originally posted by AlaskaVX
ALRIGHT VX-KING POST SOME DAMN PICS OR GET THE **** OUT!!!!!!!!!
What about metal seat covers?;Dy;
Repeating my message on other threads:
Just ignore VXKing. If he cannot prove his allegations, lets ignore his posts (or the moderators can block him from this site). Do not reply to his messages, do not care about his messages. It's that simple.
I'd be interested if we can get some rear mats that match. Just flat ones I can velcro to the carpet would be cool. Or a nice contoured one-piece unit for the rear floorboards. That'd be pretty sharp. Also, maybe a nice flat spot on a corner or something for engraving... I know I'd love to have my name engraved in the drivers side floorboard. Think we could get the vehicross.info logo engraved on them? Scott...hint hint...:).
I could provide the art work if you choose this route... Thanks for the consideration ;Dp;Quote:
Originally posted by hitnrun74
I know I'd love to have my name engraved in the drivers side floorboard. Think we could get the vehicross.info logo engraved on them? Scott...hint hint...:).
Quote:
Originally posted by TDAWG
I talked to the shop and he asked me to swing by friday to see what we could come up with.
TDAWG-- Did you meet with the shop yet and discuss some options?
hey everyone I met with Joe and he said not a problem I told him about some of the ideas so far and he said "I don't see why not."
I asked about leaving a flating out a spot for engraving he said yeah. I was also thinking about the back floor he told me to drop by tomorrow or tuesday to see what we could come up with. Those are the best 2 days for him cuz it's always slow on those days. So cross your fingers and toes. As for price he said he'll see what he could do. Depending on how much time it take to do them all he said he'll drop his normal start fee and might even drop his his hourly rate and give us a good price for the diamond plate per set. As for coating it with something scratch resistent. he said maybe adding an acrylic coating would do the trick. I'll post something as soon as he gives me something.
they will look hot on my finish vx
how can i get them
how much price doesn't matter
how much price doesn't matter
Because you aren't going to buy them anyway! Sorry, couldn't resist. You just cracked me up with that...
That would chew up my boot heels something fierce...
I'll pass...
WyrreJ
VXer
2001, Black, VX, 0781
Nashua, New Hampshire
Joined Feb 2003
98 Posts Post# 29
how much price doesn't matter
Because you aren't going to buy them anyway! Sorry, couldn't resist. You just cracked me up with that...
why r u saying that is it cuz you dont have the money or do you need me to buy it for you
VX-King,
While your offering, I'll take a set! :) (please, lets not murder this thread too)
LOL. So true.Quote:
Originally posted by WyrreJ
how much price doesn't matter
Because you aren't going to buy them anyway! Sorry, couldn't resist. You just cracked me up with that...
TDAWG--
Did you hear back from the shop lately about the metal mats?
Gang,Quote:
Originally posted by Bantan
I spoke to Tom at Legend5, he said that he would add this to his Development list. We can get a discount, but he has to first find the vehicle. They are located (in 914 East Osbourn Rd Unit 218)
Phoenix, AZ 85014. The regular price for a set (2 front & rear mats) is $179, but for Our club/cult $159 including shipping. Maybe someone in the area can volunteer to get fitted.
I just spoke to Tom at Legend5 again. He asked if there was someone with a VX that lives in the Phoenix, AZ area that will be willing to get test fitted for the Metal Floor mats. Tom sounds like a cool guy and would come to your location, it would only take a few minutes. He was also looking into getting them Anodized for a better stronger finish.
If anyone can spare a few minutes please let me know or contact him directly. Tom's # is 623-393-9172
I stopped in at a local metal fab shop, and he wasn't able to make the mats because of the 'hump' on the passengers' side floor. I guess Legend5 already has the necessary tools. It's a shame to see this mod fade away...
Sorry guys,
I haven't posted in awhile about the floor mats. Since I started working at PepBoys, I haven't gotten alot of things done that I would have liked to I give my boy a call and see what's up. since his shop is not far from work I'll see if he could do some fab work and see what happens. I'll post up once I get some answers.
Thanks Tdawg, you cheered me up:dance:
Well guys once again my impatience got the better of me.
I found a diamond plate imitation PVC sheet and cut it to fit.
I like them, but still hoping for someone to produce the real thing.
http://www.vehicross.info/gallery/da...s_pass-med.jpg
http://www.vehicross.info/gallery/da...driver-med.jpg
What do y'all think?
Sorry to everyone for not getting back to you all. I've gotten busy with regular work as well as Designs for some peeps. I got this weekend off so after the meet Saturday I'll give him a call and see if we could hook Sunday go down to the shop and see what we can come up with.