just curious, where do you put your switches for aftermarket lights, accessories and whatever else requires switches? pics encouraged!
Printable View
just curious, where do you put your switches for aftermarket lights, accessories and whatever else requires switches? pics encouraged!
I put my front rally fog lights switch on the extra switch on the center consol area, and melted a hole just big enought to fit the aftermarket switch. I used a soddering gun to melt the hole, and niow it looks like it came with the sitch from the factory. 1 of the pictures is from the inside.
http://www.vehicross.info/gallery/da...icture_108.jpghttp://www.vehicross.info/gallery/da...icture_107.jpghttp://www.vehicross.info/gallery/da...icture_106.jpg
I used Moncha guide when I installed the Hella Micro DE fog lights and then I added the PIAA series 2100 driving lights. I used 2 OEM fog light switches that Merlin supplied from St. Charles and installed then in the top of the dash for a factory look. Next project is to move the mirror heater switch to the bottom position where the blank switch is.
http://www.vehicross.info/gallery/da.../IMG_00052.JPG http://www.vehicross.info/gallery/da...IMG_0006-3.JPG
Not sure why when you click on my photos nothing happens?
You most likely posted only thumbnails instead of a thumbnail that opens to full size. ;)
For two of my sets of fog/driving lights I mounted the little "tap switch" that came with the lights to the front side of my shifter with some double stick tape...
Now that I'm used to them being there, it's rare that I hit them by accident.
Thanks Ldub, thought I did it the same as all the other photo's I've uploaded. Will play with it.
TMI, Bro, TMI !!! :pQuote:
Originally Posted by rowhard
first bump, now TMI :confused:
Too Much Info
Ta
my two auxillary light switches come up throgh the middle console next to my winter drive button
Moncha, i have been wondering, where do u get those switches and housing that goes on the little fuzzy hole on the left side of the wheel on top of the air vent. do u buy it like that, or u made it and where did u get the switches at 2? ty.
Here's a link to a thread that has all that info:
Link
If you scroll down to the bottom of this page, you'll see other related threads as well.
a month and a half later i finally managed to decide what i want to do with my switches.. dont like the rodeo bezel... so i made my own, i havent decided if i want to leave it as is or add 3 more where the remote in this picture is, or add indicator LEDs under each switch.. hmmm from left to right the switches control:
auxillary cooling fan in engine bay (not installed yet)
roof mounted offroading lights 1&4
roof mounted offroading lights 2&3
http://www.vehicross.info/gallery/da...itches_012.jpg
Eric,
looks really cool good job and i would add 3 more switches and led indicators that would look much better.
[IMG]http://www.vehicross.info/gallery/data/515/57pass.jpg[/IMG]
here are mine
I satyed conventional
http://www.vehicross.info/gallery/data/500/IMG_0003.JPG
I have my switches for my 4 offroad lights up on the roof basket wired in using a four button "tape" switch setup I got from autozone. I used the dremel to put an extremely thin slice into the back of the fuzzy hole panel and the "switches" are adhered inside the top of the fuzzy hole, leaving me with 100% use of the fuzzy hole still. The switches are all but invisible, and if you didn't know they were there already, you never would. I'd post up some pictures, but honestly you really wouldn't see anything even then.
here is were I put my switch. shawn
http://www.vehicross.info/gallery/da...hment_aspx.jpg
its a good place thats where i got my switchQuote:
Originally Posted by psychos2