My "other" Isuzu, well, Honda lol

Not much new going on yet, getting her ready for her first "real" offroad trip tomorrow. I was under the truck and remembered that I didn't have a flexplate inspection cover for my new transmission (my old one was a solid bellhousing with no opening), so I fabbed up a metal piece to fit inside the hole:

http://a1.sphotos.ak.fbcdn.net/hphot..._4349479_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphot..._5619186_n.jpg

http://a8.sphotos.ak.fbcdn.net/hphot..._5435325_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...1_641471_n.jpg

I have a brushguard on the way from Ron that I am going to build a bumper off of so that will be my next project

nice work!! I need to learn how to weld... !

Thanks man!

Been awhile since I updated anything on this, but...

Top is off!

http://a3.sphotos.ak.fbcdn.net/hphot...01890595_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphot...80493407_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphot...76934119_n.jpg

Still need to do the finishing work on it but out of time for today, have to finish it later. I'll probably make a removable top of some sort for the rear. I've just been enjoying her recently and wheeling it. Working on a front bumper design right now.

http://i583.photobucket.com/albums/s...t/IMG_6187.jpg

http://i583.photobucket.com/albums/s...t/IMG_6188.jpg

http://i583.photobucket.com/albums/s...t/IMG_6185.jpg

http://i583.photobucket.com/albums/s...t/IMG_6206.jpg

http://i583.photobucket.com/albums/s...Z/IMG_6236.jpg

http://i583.photobucket.com/albums/s...Z/IMG_6609.jpg

http://i583.photobucket.com/albums/s...Z/IMG_6610.jpg

Lookin' good. I didn't know the top came off the older Passports/Rodeos.

I see you have your tow strap handy while in the mud... next mod possibly & new bumper with a winch?

The top doesnt come off without some sort of cutting tool :) im working on a winch bumper, just making some final decisions before I start building

Quote:

---

Originally Posted by RamAirZ

The top doesnt come off without some sort of cutting tool :)

---

NICE :yesy:

yup, combo of sawzall and a cutoff wheel works wonders. I cut the interior panels yesterday so they fit back in correctly, still need to clean up the cuts and close the openings up. Then I'll start looking at a snap on top or something

Ok, so roof rack or no roof rack..

rack:
http://i583.photobucket.com/albums/s...0-10112949.jpg

no-rack:
http://a6.sphotos.ak.fbcdn.net/hphot...80493407_n.jpg

Definitely WITH

Just bolted it down and pulled the carpet, also removed the rear seats. I'm debating if I should leave them out. I'm also debating if I should keep the spare on the back or move it to the cargo area, watcha think?

Quote:

---

Originally Posted by RamAirZ

Just bolted it down and pulled the carpet, also removed the rear seats. I'm debating if I should leave them out. I'm also debating if I should keep the spare on the back or move it to the cargo area, watcha think?

---

Leave the back seat out. You aren't planning on transporting kids in that thing, right? As for the spare, build a cage and mount it where the top used to be, Baja style!

Quote:

---

Originally Posted by Cobrajet

Leave the back seat out. You aren't planning on transporting kids in that thing, right? As for the spare, build a cage and mount it where the top used to be, Baja style!

---

^ That would look sweet but rear visibility would suck :-( ^

As far as performance goes I would mount the spare in the interior's floor board. Definitely looks a lot better with the roof rack in place though. As far as rear seat just leave yourself the option of putting it back in just in case you have a group of people that want to hang on for some off roading.

Could you make some fender flares for this thing? Nothing too crazy kinda like what LDub added to his?

Quote:

---

Originally Posted by LittleBeast

Could you make some fender flares for this thing? Nothing too crazy kinda like what LDub added to his?

---

I had the same thought. Some flares would look good on there.

Quote:

---

Originally Posted by Cobrajet

Leave the back seat out. You aren't planning on transporting kids in that thing, right? As for the spare, build a cage and mount it where the top used to be, Baja style!

---

It's not inteneded to be a family hauler but I want to keep it where I can haul the kids around town if need be (i.e. transmission goes out in my Sierra and it's down for a few days, Passport will be used while it's down) In reality the kids would only be in it for about 5 miles a day when I take them to daycare and my wife picks them up on her way home.

Quote:

---

Originally Posted by LittleBeast

^ That would look sweet but rear visibility would suck :-( ^

As far as performance goes I would mount the spare in the interior's floor board. Definitely looks a lot better with the roof rack in place though. As far as rear seat just leave yourself the option of putting it back in just in case you have a group of people that want to hang on for some off roading.

Could you make some fender flares for this thing? Nothing too crazy kinda like what LDub added to his?

---

Quote:

---

Originally Posted by samneil2000

I had the same thought. Some flares would look good on there.

---

I've been thinking about flares, haven't decided on anything yet. Going to be working on a snorkel soon and still have to do my bumper. Also have an engine swap on the burner lol. I'm thinking about mounting the tire in the rear cargo area on an angle a bit. Haven't decided if I should leave the tailgate, ditch the tailgate and run a net or have the tire stick out the back a little and have nothing. I'm also still not sure if I should move it at all, what do you guys think of it on the factory carrier? I think it looked fine with the roof but haven't decided if I like it without the roof