Love that stuff :thumbup:
I'm using similar 16# right now for filling voids and sculpting front edges of the Vx trailer.
Not cheap..but its good :thumbup:
Jo
Printable View
Love that stuff :thumbup:
I'm using similar 16# right now for filling voids and sculpting front edges of the Vx trailer.
Not cheap..but its good :thumbup:
Jo
@ Jo...Yeah i usually work with 7-10 # yellow foam for quick mockups here at work.Quote:
Originally Posted by JoFotoz
@ everyone else...the rear plate mold was dropped off this morning at the local vacuum formers. He's going to pull both the hitched and non-hitched versions. When i receive the parts, I'll clean them up and test fit the non-hitched version on my vx (since I have a standard hitch installed). But, will need someone (local preferred, but not necessary) who has a Tone Monday hitch to test fit the other. If all things go well, I'll offer these first two at a discount.
I have a Tone hitch if you don't find someone local.
Sounds good MH. Still awaiting the first two test pieces to be pulled from the formers any day now.Quote:
Originally Posted by Mile High VX
UPDATE:
First two rear plates in hitched and non-hitched version fresh from the factory. These were pulled with 1/4" black abs plastic. I'll be trimming off the extra flash material and clean up the edges a bit to test fit the non-hitch version on my vx.
As for the hitched version, Mile High, I'll get in touch with you soon w/ details.
http://i1124.photobucket.com/albums/...r%20plates.jpg
Oooooh!!! Let us know when you're ready!! Thanks Ron!!
Test fit for the non-hitched version of the rear plate is good. NOTE: Since the cladding and skidplates can vary from one vx to another, adding additional mounting screws to secure the top edge of the plate directly to the cladding will give you a uniform flushed fit. Since it's constructed out of ABS plastic, the plate is pliable enough to conform to the shape of the bumper. In my previous (Ebony) vx, I never had to use additional screws on the top edge. However, with this recent (Ivory) one, I added two additional screws on the outter top corners replacing two of the cosmetic screws on outter left and right. This resulted in a clean tight fit of the plate to the cladding bumper. I'll have a better explanation on the installation instructions in detail.
I'll be sending out the hitched version for a test fit to a fellow vxer soon. Mile High, you have a pm.
Final prices for the NON-hitched version are as follows:
-$225 primered only
ADD $85 for paint + clearcoat (OEM)
Installation hardware all included. Actual shipping is TBD.
PM me if you're interested in buying.
Once I get confirmation of fitment for the 'hitched' version (Tone Monday hitch), I'll be offering that up for sale afterwards.
After I do more hand finish work, I'll be selling this first NON-hitched version as is for $190. If you need it finished and painted OEM, add another $85. Let me know if you're interested.
http://i1124.photobucket.com/albums/...earplates3.jpg
http://i1124.photobucket.com/albums/...earplates2.jpg
Hitched (Tone Monday) version on the left and NON-hitched version (sandblasted) on the right:
http://i1124.photobucket.com/albums/...earplates4.jpg
It looks like they are black and textured out of the mold or did you make the hitched one textured and black?
You have two back...:bwgy::bgwo:Quote:
Originally Posted by ron
Kool!! Love to have mine no hitch painted silver please!! Let me know how much for both front and back? I can pwypal. I can have a friend in Antioch pick it up locally. PayPal is waiting! Thanks Ron!
hey guys...
Currently, the price is at $225 (primered only). However, I was just offered by my manufacturer a quantity discount if I order the rear plates before May 15th. This would ONLY apply to the NON-HITCHED version of the rear plate as I'm sending the HITCHED (Tone Monday) version out for test fitting still. This means, that I can offer the rear plate at $199 (primered only). Add $85 for oem paint still and shipping would be around $10-$15 (approx.). I'll verify exact shipping cost when I ship the HITCHED prototype out later this week. After May 15th, the price goes back up to $225. To make things easier, I'm going to create a direct PayPal link to order the rear plate.
This is your chance to purchase the rear plate at a discounted price. Do keep in mind that the funds will also help continue the development of the side and front skidplates as well as other vx goodies. Please e-mail me (rudesvx@sbcglobal.net) if you have questions. Thanks. rudy
hey Evo...Quote:
Originally Posted by EVO
We chatted a couple of years ago about getting together but never came around to it. I work here in SF (near the ballpark). If you want I can help install on your VX if you're in the area. Let me know.
The front and sideplate molds have not been developed yet as it requires funds to produce the molds. Funds from the rearplate sales will help continue development of these molds and other future VX accessories.
rudy
Quote:
Originally Posted by CatFish
Yes, they are textured black off the mold. The other, I sandblasted the texture for an experiment. rudy
So could I use it right out of the mold? I like the way it looks without doing anything to it. Would it need to be painted for some reason?Quote:
Originally Posted by ron
Here's the link to purchase the rear plate at it's limited time only discounted price: http://aftershockproducts.com/#/vehi...ies/4589158544
Feel free to ask any questions direct (rudesvx@sbcglobal.net). Thanks. rudy
You would get a rough sanded edge as the plate needs to be cut out of the shell and sanded. What I was going to do with all the plates that are painted was to keep the surface texture, sand the outter edge, then paint color and a clearcoat with some texture to blend the smooth surface and textured surface a bit. Let me know if that sounds good to you. rudyQuote:
Originally Posted by CatFish
I'll take one of everything when it's all ready ^__^
Hey Ron!! Nice meeting you today! The rear plates were very nice!! Your VX is impressive and almost looks new parked next to mine! LOL!!
Hey Evo...Quote:
Originally Posted by EVO
It was great meeting you and your vx. Thanks again for your purchase and support of the products. I'll let you know when I get your plate ready for installation. rudy
http://i1124.photobucket.com/albums/...esvx/meet1.jpg
http://i1124.photobucket.com/albums/...esvx/meet2.jpg
Yeah, those pictures could be a before and after pictures!!! Box stock vs. tastefully modded! As you can see the abs skids really make our VX's POP!!!! Can't wait!!!
Just a reminder for those who are interested in buying the rear plate and haven't yet. May 15th is the deadline to purchase the rear plate (non-hitch version) at the discounted price of $199 (primered version). Add $85 if you want painted oem color w/ clearcoat. Shipping in the US only is $15-$18. Sales tax applied to CA residents. Note: if you have a standard aftermarket hitch (Curt, U-haul, etc.), other than a Tone Monday hitch, this rear plate WILL work and NOT interfere with your aftermarket hitch.
To purchase, here's the direct link:
http://aftershockproducts.com/#/vx-r...ate/4589197405
Price goes back up to retail price of $225 after deadline date. Let me know if you have any questions. Thanks. rudy
Are you going to Moab? if so I would love to see your product in person.
Unfortunately, I won't. Not only do I work full time, I also teach part-time as well at a private art school. Also, my daughters won't get out of school til June. You may run into a fellow vxer who may have one of my front skidplates on at moab. There usually is. If it's made out of 1/4" abs material, then it's one of mine. If it's fiberglass, then it's someone elses. rudyQuote:
Originally Posted by CatFish
I will look for your skid plate on a VX in Moab, if I like it and get my order in before the 15th can I get it right out of the mold with just a little trimming but no sanding or priming done to it? I am thinking about just doing a textured clear only with no paint or primer but I am not sure so I would like to get it in raw form so I can decide after I get it.
I can send it raw. I'll cut most of the flash material off close to the edges and pre-drill the holes for you. You can apply whatever finish you like afterwards. Let me know if you decide to order or not. Thanks. RudyQuote:
Originally Posted by CatFish
Just a friendly reminder that the deadline to purchase the rear plate at the current sale price is this Friday, May 15th. Please go to link if interested:
http://www.vehicross.info/forums/sho...8&postcount=62
Thanks. rudy
Thks!!! Ron. Ordered mine!!!
http://aftershockproducts.com/#/vx-r...ate/4589197405
Reminder: tomorrow is the last day to order the rear plate at sale price. If you decide to include the paint option, make sure you include year of your vx and color in the PayPal comments box during transaction. Let me know if you have any q's. Thanks. Rudy
Just ordered mine! Thanks RON!!!Quote:
Originally Posted by ron
Today's the last day to purchase the rear plate at current sale price! Price goes back up tomorrow. If you're on the fence in purchasing, please do it now as this WILL help fund the development for the front plate which is next on deck. Let me know if you have any questions. Thanks. rudy
Link:
http://aftershockproducts.com/#/vx-r...ate/4589197405
A couple of rear plates (painted proton and primered) shipped out today. I still have a few left from the first batch order of 10. Once all are gone, it may be a while before I order another batch. If interested in buying one for yours, click on the following link:
http://aftershockproducts.com/#/vx-r...ate/4589197405
http://i1124.photobucket.com/albums/...517_081707.jpg
Looks nice Ron. Well done once again.
That looks sweet. Outstanding job! Thanks my kid's "BUMBLEBEE" will be happy.
How does it look Rudy? Thanks! Ray.
Looks great Ray! Thanks for the support!Quote:
Originally Posted by VXDAD
http://i1124.photobucket.com/albums/l571/rudesvx/rm.jpg
Like to mention that I have about 5 more rear plates ready for paint and available for purchase. After these 5 are done, not sure when I'll make another batch order as I'm still trying to save for the front plate mold to be fabricated. Let me know if you have any questions. Thanks. rudy
Hi Ron,
What is the recommended hardware to get these attached? I did a few searches in the forums and didn't seem to find anything from the past.
The plate will come with hardware (stainless steel replacement screws) and install instructions. Basically, utilizes the bottom oem cladding screw locations. Mostly this method will suffice to secure the plate to the cladding. However, because cladding differs from one to the next, you can replace the top cosmetic screws with self taps. I just replaced the top two outter corner ones as the corners were lifted and this gives it a cleaner flushed look. Others have replaced all of the cosmetic screws all together. Hope this helps.Quote:
Originally Posted by Knigh7s
The plate is very easy to attach 2 hex bolts and 3 screws. 10-30min. Great fitment!