Printable View
That helps, otherwise you have to fabricate the connections yourself. But then again you would have to splice the wires from the factory harness to your aftermarket lights anyway, so I guess it's the difference between making that splice at the switch pin or further down the wire.
Our very own KAT called out in this eBay ad:
http://cgi.ebay.com/ebaymotors/2000-...Q5fAccessories
No Way!! Too cool! I'd posted about several of his parts on 11/14 but didn't scroll all the way down so I didn't see that!Quote:
Originally Posted by vt_maverick
I hooked up "wintermute" with this seller a while back for some parts he needed. He also sent me a cool pic of his "off road beetle"...it's really funny. Just for s&g I'll see if I can find it and post it.
EDIT- Found the pics! This is Vic's off road VW Beetle! He'd fit in around here with his sense of humor!:laugho:
http://www.vehicross.info/gallery/da..._party_092.jpg
http://www.vehicross.info/gallery/da..._party_094.jpg
http://www.vehicross.info/gallery/da..._party_086.jpg
http://www.vehicross.info/gallery/da..._party_093.jpg
I bought one of those Rodeo fog switches from that guy on eBay earlier this year. I even posted a link for it. I got it in a week or so with no problem. It was brand new.Quote:
Originally Posted by vt_maverick
However, it is NOT a direct fit for our dash or the triple switch bezel. It's for a '98+ Rodeo and we need a '97 or earlier, but they never had a fog switch at that time.
Our switches have a notch in the upper left corner and our dash and bezel have plastic in that corner. The Rodeo switch is square in that corner. I cut out the corner plastic in the bezel to test fit and it still was not quite right. It just did not fit 100% snug and I think the depth or something was not right also. It didn't sit the same way as other VX switches. I was not happy with it at all. Some may find it to be okay, but I wanted something with a perfect fit like our VX switches.
I then tried to remove the button face piece to see if it could be swapped out with a another VX switch face. It was hell gettin' it off and it was too different anyway to swap! The switch ended up trashed and I salvaged the bulbs. Only $11 lost and a lesson learned.
I did look up a '97 Trooper fog switch that may be compatible, #8-97135-512-0, but I never looked into it anymore.
I'm sorry I didn't post this earlier, but I just saw this now. Moncha actually was using the Rodeo switch many years ago and I think he mentions the slight modification somewhere.
End of story.
Mark Griffin
Edit: Here's some old info I found about the fog switches-
Quote:
Originally Posted by IsuZOOM
The cheaper switch is the Rodeo one. The more expensive switch is the Trooper one, #8-97135-512-0 for ~$50-60. But I don't know for sure if it fits, 'cuz the other post was at Club VMag.Quote:
Originally Posted by Moncha
Another edit: I found the old thread at Club VMag about the two fog switches, but no one tried the more expensive one, so we still don't know if it fits.
Just scored his Windows switches and door panels and misc parts. Just got off the phone. Was inprocess of posting his re-listings here with the shout-out to Kat when he gave me his #.
Getting a whole box of stuff, we were able to save shipping as my brother in Chicago is going to pick up. All other items besides the door panels and window switches will be posted here as soon as I get them and can take pics.
Seems like you could cut that corner piece then use some metal/plastic shim material and glue/cement to hold it in place maybe? As infrequently as you press it I would think it would hold okay.Quote:
Originally Posted by deermagnet
Btw, I tried putting an Axiom hazard switch in a '96 Passport dash (same as ours only black) and discovered the same issue. So I think it's reasonable to assume that any switch made after 98 won't fit perfectly.
Weird, I put a fog switch in mine, I got it out of a trooper though, and it went in just fine. I have no idea what year it was...Quote:
Originally Posted by deermagnet
Vic (vwbeetle53) has a large group of misc VX bolts listed....
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_1226wt_909
Been in contact with Vic a few times. He wanted me to pass on that he has some rear door cladding, rear door, both front doors and dash. Also some other cladding and right fender. He asked that I post the info here.
Contact him via his ebay contact.
Pics as I get them.
http://1dl.us/129098474589826.jpg
http://1dl.us/129098470588749.jpg
what is vics ebay username?
vwbeetle53Quote:
Originally Posted by vxfocus
See KAT's post above.
is two satelite dishes painted black to act as earsQuote:
Originally Posted by VX KAT
Engine out of a '99 with 82k miles, in Wisconsin
http://cgi.ebay.com/ebaymotors/ws/eB...3#ht_858wt_683
Tweeter covers!!
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_2491wt_688
I can't believe no one bid against me on the fuel pump! Brand new OEM fuel pump still in original packing. I got it for less than 50 bucks shipped. They list at 375 on isuzu parts. It is the entire assembly, hangar and all. Just drop it in and hook it up.
I also got a vx alternator for 25 bucks from sleveritt. Good parts deals for me, my frankenstein stockpile keeps getting larger....
tweeters, one is broke
OEM center console lid WITHOUT the usual cracking
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_2458wt_728
$147.64 including shipping... that price is RIDICULOUS. :eek:
This ebay seller has just gotten in a VX that was hit in the front if anyone needs some parts give them a quick note or call 800-735-2376.
whiteysallforeign
This is the same seller that has the arm rest in the post above by VX KAT, so prices may be a bit high, but you all negotiate well anyway...:bgwb::bwgy::smilewink:bgwo:
Yeah!! I only paid $70 new from Merlin. He's a new VX parts seller so maybe he'll see his prices are a bit too high and get reasonable over time...:goof:....or not....Quote:
Originally Posted by vt_maverick
Somebody really should go buy all this stuff just for the rear door. Looks like he's got the entire rear door, front bumper (not cladding), steering wheel and column (any overseas members want it?), stock air box, rear cargo mat, etc.
http://detroit.craigslist.org/okl/pts/2089524285.html
http://images.craigslist.org/3m03o23...475fcd1a17.jpg http://images.craigslist.org/3n03oe3...c015031d96.jpg
http://images.craigslist.org/3k43o03...cd0f221c1a.jpg http://images.craigslist.org/3k63ma3...23adeb1ad0.jpg
No Kidding...thats a bargain bunch o'bits..:p
Wish it was nearer me.
jo
Quote:
Originally Posted by vt_maverick
had an uncle that lives in IL but at other end of state and he is 80 so cann't expect him to pick it up or was going to do it.
Not sure if these AISIN hubs fit our VX...lists Trooper, Amigo, Rodeo.
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_500wt_1004
Just wanted to revisit this quick... I just mounted an '04 Axiom fog switch in the fuzzy bezel with no problem. Did take several minutes of Dremel work however, and since it's a tight fit the back of the bezel looks like it went through a meat grinder. On the other hand the switch sits perfectly flush with the blank/tailgate switches, does not move when depressed, and you can't see any of the Dremel carnage from the front.Quote:
Originally Posted by deermagnet
I found that you need to cut the corner piece but also grind down the plastic "lip" that adjoins the corner. Shaving that piece down just a hair (maybe 1 mm) allows the metal retaining clip to slide all the way through and lock.
So for anybody worried about making these switches fit, don't be! :thumbup:
Link to eBay ad
I am not sure what this is all about, I just went out to the truck, popped out a blank, and the switch went in just fine? I am thinking of removing the useless blinking red light and adding this switch in that location. Not sure what I am gonna hook up though, maybe roof lights?Quote:
Originally Posted by vt_maverick
Maybe you were willing to jam it in there harder than I was. :)
I know these were mentioned a long time ago.
http://locktup4x4.com.au/hilux-solid...r-kit-549.html
Not sure if anyone ever tried them. Maybe after Christma$$$, I'll order one for the front & see how easy the install is.
I believe that this will work in the VX.
$1,500
http://denver.craigslist.org/pts/2115283850.html
The install should take about 2 minutes. Our hose is just squeeze clamped on . My question would be why? Our vent hose comes out way up in the engine bay, and if that is not far enough for you, just add some more hose, you could take it all they way to the roof if you wanted:)Quote:
Originally Posted by tom4bren
And if this is an indication of his prices he's very reasonable...
http://cgi.ebay.com/ebaymotors/Isuzu...item5641a93aa7
Tail light for $39.99 and he has both.
Talked to this seller today (same guy MH mentioned above).
I bought the roof rack and the driver's interior door handle.
The VX in the yard is really complete with NO impact. LOTS OF GOOD STUFF!! :thumbup:
Doesn't know what's wrong with it.
(I thought maybe it was a blown engine, but he just didn't know).
He mentioned someone already inquired about the rear door, so that may end up already sold.
He seemed like a decent guy. Was really interested in getting familiar with the forum. He really likes the VX and wants to get one for himself. I told him I'd post his contact info here. The ebay listing says SC, but his phone number is NY. I think the yard is actually in SC, not sure, since I couldn't find it on the web, and forgot to ask.
*** He went away TODAY for the holiday, back on Monday. Asked folks to call him next week for parts. ***
TOM
AUTOARTIFACTS
845-820-2427
1999 Astral
EMAIL -He's going to send me his real email address when he gets back. All I have now is the ebay "email".
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_2184wt_915
:thumbup:
Looks like a pretty complete '00 Kaiser in this junkyard in Kingsville, MO.
149k miles.
Don't see any impact/collision damage.
I'm already buying the roof rack, natch....:goof:
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_2164wt_988
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_500wt_1009
Dang, seller raised the opening bid, BIN and shipping costs while I was viewing it...:(
I know these aren't available new, but what WAS the price new? Anybody know?
that was quick, its gone already
I noticed he raised the price while my internet connection crapped out, then he killed that listing and RELISTED it at a BIN of $399.:eek:,...just keeps going up...:(Quote:
Originally Posted by yellowgizmo99
http://cgi.ebay.com/ebaymotors/Isuzu...#ht_500wt_1009
CHECK OUT ALL THE NEW OEM stuff he has!!!
http://motors.shop.ebay.com/ekim721/...911.m270.l1313