Tone's Light Adapter for Trailer Lights

I'm having trouble with my connections from the wireharness to the tail lights...I thought I connected it correctly...

Can someone who has purchased this product tell me which wires from the harness go where...I know, from Tone's wiring code listing, which wires activate Break, Parking, R Turn and L Turn on the VX...but I mounted the light adapter under the bumper and cannot remember which color wires go where comming out of the adapter...

Thanks in advance

Jamie

If yours is the typical 4-wire connector, then it's:

Yellow: left turn signal
Green : right turn signal
Brown: taillight
White: ground

However, you would probably have at least one additional wire for the brake lights because the VX has turn signals separate from the brake lights..

I think it's a 4 wire....http://www.tonemonday.com/storage/HitchInstall.pdf...

The picture is about as fuzzy as my memory...