sway bars and trans. interceptor??

Printable View

08/30/2005, 07:43 PM
jgrish

sway bars and trans. interceptor??

I was just wondering if anyone has upgraded their bars and how it turned out. What exactly is a trans interceptor and is it worth the mod?
08/31/2005, 06:26 AM
Cyrk

I got my Swaybars from Calmini they are 40% stiffer than stock bars... so they say, but they are the same size in diameter.

http://www.pureisuzu.com/sway_bars4.htm

trans interceptor is an electronic shift kit that plugs into your transmission and has adjustable pots to to firm up line delay and torque lockup. You will feel a crispness when you are shifting and it is adjustable to the firmness of your choice.

I think that both these are a good upgrade, they have been good to me. ;)

-Dave
12/23/2006, 08:14 PM
blenke

I put the Calmini bars on and they were a definite improvement in the "roll" of the car body when cornering. The trade off is a moderately rougher ride. As far as size mattering, the rear bars are almost the same size in diameter, but the front bars are about 50 percent larger in diameter.
A shot of the front sway bar......http://www.vehicross.info/gallery/da...MINI_SWAYS.JPG
04/12/2012, 01:38 PM
H3_VX

I copied this from an archived thread.....

"The VehiCROSS sports a double wishbone, independent front suspension using torsion bar springs with a 1.1" stabilizer bar.
The rear is comprised of a 4-link suspension using coil springs with a .75" stabilizer bar."

Are these the measurements I should provide a shop with who is asking for my sway bar diameters. On the advice of Breezy i'm gonna try some energy suspension sawy bar bushings to make a little better ride.
04/12/2012, 05:24 PM
Ldub

Quote:

Originally Posted by H3_VX

Are these the measurements I should provide a shop with who is asking for my sway bar diameters. On the advice of Breezy i'm gonna try some energy suspension sawy bar bushings to make a little better ride.

I believe Boss Mans write up, with part #'s & everything, is in the knowledge base or how to's...or somewhere...:yesgray:

Search = friend...:smilewink
04/12/2012, 05:49 PM
vxfocus

anyone know where to get the trans interceptor???
04/12/2012, 07:03 PM
espidus

I double that...
04/12/2012, 10:23 PM
Ldub

Quote:

Originally Posted by H3_VX

I copied this from an archived thread.....

"The VehiCROSS sports a double wishbone, independent front suspension using torsion bar springs with a 1.1" stabilizer bar.
The rear is comprised of a 4-link suspension using coil springs with a .75" stabilizer bar."

Are these the measurements I should provide a shop with who is asking for my sway bar diameters. On the advice of Breezy i'm gonna try some energy suspension sawy bar bushings to make a little better ride.

Quote:

Originally Posted by Ldub

I believe Boss Mans write up, with part #'s & everything, is in the knowledge base or how to's...or somewhere...:yesgray:

Search = friend...:smilewink

Here ya go...not where I thought it was, but part #'s are in here...:yesgray:

Quote:

Originally Posted by vxfocus

anyone know where to get the trans interceptor???

Quote:

Originally Posted by espidus

I double that...

AFAIK, the company is no more...:(