Printable View
Did the search and found little information. Can someone highlight how to take the rear panels off to access the rear speakers? I have only seen the two plastic pins loacted at the top of the upper panel and not sure if that is all. Speakers seem a bit tough to get at on the VX.
Thanks
Very Carefully. The rear panels are a day-long job. Let me tell ya. There's a million of the little panel tabs that need to be popped off. I'd go buy about 2 dozen of them before you start the process as you'll lose many of them. I cant recall the exact procedure as I havent had mine of since 2003, but just take your time and have lots of patience. Dont try to rush it!
Detailed instructions are available in the VX Workshop Manual, which is available on Tone's website. Look under:
8. Body and Accessories
+ 8J. Exterior / Interior Trim
+ Interior Trim Cover and Assist Grip
Here's a post on dynamating that has some photos to help too.
http://www.vehicross.info/forums/sho...66&postcount=8
I sent you instructions how to do the job (Check your yahoo address)...hard part is the upper seat belt...it requires a torx bit (size 50 or 55).
Received the email dkmiller and thanks to everyone for the other infomation.