-
Bixenon
Everybody likes a xenon light, but if you just put the H4 xenon bulb in to VX headlamp it will light like sh.. mmm not so well))). I would like to explain how to insert bixenon lenses to VX headlamp, for the exellent light ).
All this pics shown a JDM headlamps wich is little different, but I think, technology is the same vith US VX headlamps. I used Hella lenses only, all the rest (bulbs, starters etc) is SHOME.
1. First, you have to put you headlamp in to the oven :eek: with temperature approx 100 C (Celsium!!!) for a 10-15 min, until hermetic became soft, then use screw driver or knife for removing a front glass (use gloves - it is HOT:))
http://claus.fotoplenka.users.photof.../152347544.jpg
2. Take out all the parts, remove a reflector, for the next step
http://claus.fotoplenka.users.photof.../152347545.jpg
http://claus.fotoplenka.users.photof.../152347550.jpg
3. prepare reflector for lens applying
http://claus.fotoplenka.users.photof.../152347552.jpg
http://claus.fotoplenka.users.photof.../152347555.jpg
4. 90 mm Hella bixenon lens (a lot of europinean cars produsers using it) bulb type is D2S/D2R.
http://claus.fotoplenka.users.photof.../152347538.jpg
5. apply lens in reflector's body, you have to remember about "horizont line" when applyuing lens.
http://claus.fotoplenka.users.photof.../152347559.jpg
6. when the horizont and vertical position is right, fix the lens in reflector's body
http://claus.fotoplenka.users.photof.../152347561.jpg
http://claus.fotoplenka.users.photof.../152347565.jpg
7. install reflector back in to the headlamp
http://claus.fotoplenka.users.photof.../152347566.jpg
8. Than we can see ugly cuted reflectors surface, I used a plastic folder to maka a cover :bgwo:
http://claus.fotoplenka.users.photof.../152347571.jpg
http://claus.fotoplenka.users.photof.../152347573.jpg
9 make a cover and put in
http://claus.fotoplenka.users.photof.../152347578.jpg
