Printable View
In my attempt to install a new stereo and back up camera I have lost the note I made of the wiring to these. They are fixed direct to the back pins on the switches i.e. no plug like the two switches above them just wires going into the pins.
If anyone knows what the wiring sequence of the plugs are and what wires I need to position I would very much appreciate it.
David, pretty sure your fogs would be aftermarket fitup.
Not on a USA VX, nor on a standard JDM.
The front fogs may have been installed in place of the standard parking lights (round ones in the plastic), but they are originally wired in with a 2 wire plug.
PK
Thanks PK,
I can see that someone has done some 'extra' wiring into the existing loom once I have determined what wire as 12+ etc I'll need to plug them into the existing pins at the rear of the fog light. If anyone knows what the typical layout of the wires going into the switch I'll be able to start wiring it up as at the moment I've got a great number of wires just hanging out of the plug orrifice at the moment.