Printable View
rebuilt engine installed, did the reset for anti-thief, engine turns over but no start, check fuel rail and no gas, check relay it is good and fuse is good but no power to fuse, am looking at manual now to see what I can find. any ideas or what I might check out. thanks. did search and most I could find was fuse problem which I don't have.
What's the number of the "Fuel Pump" fuse you're referring to as it's listed in the manual?
Are you talking about EB-14 in the engine compartment fuse box?
If so, you might also check fuses CB-3 (dash fuse box) and EB-18 ((engine compartment fuse box).
yes, EB-14, CB-3 and EB-18 all check good, if pump is not hooked up will there still be power to EB-14? forgot to check that.
We will check that tomorrow:) I still wish we could have started it with no exhaust attached:(
I kind of kept secret that there are two VXes in my driveway for the last few weeks:bgwb:
shoulde power all time when ignition key is on. How all electrical plug connectors at left fender area?
I thought the fuel stuff ran up the passenger side? I need to crawl under there and look. Hopefully we will find something today, I have a brand new OEM fuel pump assembly in the garage, so we can at least repair now, although that pump is my trail spare for the 2 trucks.