BFH work need to fit 18x8 Borbets with 265/60-18 -WITH SLIDERS!

OK, I finally did it :freek:, I'm getting the Borbets. :clap:


I know several have done the trimming and BFH work to get 18x8s to fit with 265/60-18s.
I really want Toyo Open Country ATs in 265/60, and know they have a rather square shoulder,
So I guess it will take a little more bashing.
About how far back are you moving that bolt? Is it like 1/2" or what?

Think my slider will have to be cut back a bit (and capped)? Can see it's basically flush with the bolt head.
Any guidance would be most appreciated!

Anybody want to photochop any of these pics to tell me what needs done? Will make it a bit easier for my mechanic.

:thanx:...yet again, for all the help!

http://i1099.photobucket.com/albums/...BOLTSLIDER.jpg


http://i1099.photobucket.com/albums/...4/DSCN3019.jpg

http://i1099.photobucket.com/albums/...4/DSCN3023.jpg

Sue what offset are the borbets? If the fit is anything like my 285s you will probably have to take about a half inch off the sliders. Ill try to get a photo of my wheel Wells

Quote:

---

Originally Posted by etlsport

Sue what offset are the borbets? If the fit is anything like my 285s you will poetically have to take about a half inch off the sliders. Ill try to get a photo of my wheel Wells

---

How can you be poetic when using a BFH & a sawsall???:):):)

I just want to know what you're gonna bolt the Borbets to? Seems like you are missing some stuff in there!

Geez Sue you could just ask... no modification to the sliders required. I have Goodyear Wrangler Silent Armors which also have a very squared edge and have had no problems.

Quote:

---

Originally Posted by tom4bren

How can you be poetic when using a BFH & a sawsall???:):):)

---

Fixed it. Damn autocorrect!

Quote:

---

Originally Posted by etlsport

Fixed it. Damn autocorrect!

---

ROFL

Poetic was workin for me ... just an interesting turn of a phrase!

Quote:

---

Originally Posted by Jay Dunford

I just want to know what you're gonna bolt the Borbets to? Seems like you are missing some stuff in there!

---

What's missin' Jay :_thinking...
oh yeah....this..:cool:
http://cache.gawker.com/assets/image...150_Raptor.jpg

Quote:

---

Originally Posted by vt_maverick

Geez Sue you could just ask... no modification to the sliders required. I have Goodyear Wrangler Silent Armors which also have a very squared edge and have had no problems.

---

I guess in my adrenaline fueled haze I forgot that. Looks like there could be some slight variation in positioning the sliders when installed. Looks like mine are maybe 1/8 - 1/4" more recessed than the bolt.

Can you estimate how far back we've got to pound that bolt?

Quote:

---

Originally Posted by etlsport

Sue what offset are the borbets? If the fit is anything like my 285s you will probably have to take about a half inch off the sliders. Ill try to get a photo of my wheel Wells

---

they're -2. Same rims Ashley has.
I'm really wanting to go with a Toyo Open Country AT in 265/60
RAZ has the same Nittos, same size I have now on his Borbet rims. He has pics in his gallery. I'd love to know how much it took to fit them.

Quote:

---

Originally Posted by VX KAT

Can you estimate how far back we've got to pound that bolt?

---

Unfortunately I think that depends on production variances in our VX's. I only had to trim a tiny bit of cladding below that bolt on the driver's side but had to pound the crap out of it on the passenger side. Probably moved it back 1/8"-1/4". I would try replacing it with a pan head bolt first and then see how much more you need to knock it.

Yeah, it's possible you may just be thinking worst case scenario KAT, because I run 265/60-18 Yokohama Geloanders A/S's on my CW3's and the only trimming I had to do was to the front bumper cladding. I DO get a slight bit of rubbing when turned full lock, but it's never been enough of an issue for me that I've felt it necessary to resort to the BFH. I'm still running stock heights front and rear too.

Nice score on the CW3's by the way. Forgot to mention that amidst all the other b.s. that happened in that other thread. If you ever find yourself in emergency need of a replacement, keep me in mind as I still have the spare VT hooked me up with awhile back.

Sue, I had to remove about 3/8" off of the sliders on mine .

I still have another spare left from the set Trek and I split (beyond the spare I'm already using) too if you're interested Sue.

Quote:

---

Originally Posted by vt_maverick

I still have another spare left from the set Trek and I split (beyond the spare I'm already using) too if you're interested Sue.

---

Yeah, I'm interested....maybe I can talk Tom into carrying it to MOAB 2013, since we KNOW FO SHO HE'S COMING! Wonder if he has any more kids getting married?? :_thinking

Only 2 out of our 6 are married. No more weddings planned ... but accidents do happen.:)

btw.... Thanks Kat for the rear tailgate knobs... received them. Hopefully I will get a chance to put them to use next week or so.
It looks like I am still missing two of the plastic brackets that the tailgate cover mounts to. I have never had our cover on before, the cover was in the back seat when we purchased our VX years ago.