Lift kit?

Anyone with the Calmini lift kit on?
How is it?
How hard was it to install?
If you do have it what size are ya wheels?

Thanks



aj

You do not need the Calmini kit....although you could buy it....


just get the springs from them......do not take no for an answer....they will finagle you to buy the kit...just buy the springs.

you do not need the front bump stops........or the cross member......or the front shocks.....or the rear shocks...... they try to justify their price and ingredients...

but you only:

1) Crank torsion bars for front lift
2) Longer Springs for the rear
3) Longer shocks for the rear, but I don't recommend Calmini ones
4) Bump stop extemsions rear, like an inch and 3/4's or 2"s square x 6"L
5) Flip Ball Joints in Front
6) Alignment afterwards..to correct camber and such
7) Throw Calmini front and rear shocks in a good storage place for an emergency
8) Throw away front Bump Stop Extensions

unless you have the money to waste on the Calimini kit......but you could build yourself up much better than just settling for there products...

Lift for under $200 complete! Takes about 4 hours of your time and zero knowledge!