License Plate Bolt Size

This may sound like a crazy question, but finally received my VX and it did not have any Rear License Plate Bolts installed. I have went to O-Reilly's and purchased every type of license plate bolt that they have to no avail. Anyone have the size or a part number for the rear license plate bolt?

Thanks,

CP

I had the same problem. Luck I have a Isuzu rodeo sport. I took a license plate bolt from the sport to ACE Hardware and matched it up. Sorry, could not tell you the specifications.

M6x1.0x20
I used a pan head screw. A little shorter than 20mm would work also.

Mark Griffin

I tried many too before I found a fit. Ended up using these black nylon ones 6mm x 20mm (same as Mark's sizing). Got them at either AutoZone of Checkers/O'Reillys.....I think it was AutoZone.
If you need these just shout, they're an extra set of 4 I bought once I found that they fit.

Pics won't let me attach my new pic for some reason, so you can see it on the home page pics, yellow package.

Thanks everyone!!!! I'll try to procure that size.

Kat,
If I don't have any luck, I'll send you a PM.

Thanks again,

CP

Forget the auto parts stores. Go to Home Depot or Lowe's or any hardware store. They'll have tons of 'em with four or five head styles to choose from.

Mark