Printable View
For those of you interested, and have done our fearless leader Moncha Hella Micro DE fog light conversion, I have taken it one step farther and converted them to HID's supplied by www.xenonrider.com that user LittleBeast turned us on to.
It's loaded under Tip's and How To/lighting. It is not a straight forward bulb swap, but it is doable, hence the need to write something up on how I tackled the problem.
Yeah, I am going to do this with my 8" Hella Ralleyes. I heard they with make these already seriously bright lights that much better.
Bart
Nicely done. Yeah those things do get hot, I hope that tape holds up, it probably will do fine. I chose to enlarge the opening of the stock rubber housing for the wires to be at a 90 degree angle still, and I then bent the metal tabs to hold the bulb tight. Although those metal tabs proved to be a little to loose on one side and hence I had a bulb blow way too soon on me (8-10 months), I called and got two replacement bulbs for $50. So when I install those new ones I will try your tape job and see how it works. Oh and the bulb I had blow on me was not from xenonrider, it was one from an ebay site, this was before I found the xenonrider dude a few years ago, his stuff seems to be high quality, didn't want you to be worrying for no reason.
Littlebeast, what you did with the metal tabs and stuff, are talking about the Hella Micro DE foglights or the main headlights?
Please post pics of your Micro DE's on if you wouldn't mind... I've been thinking of getting some Micro DE HIDs, but going this route would be way cheaper, just buy micro DE and convert to Xenon.
Has anyone used XenonRider kits for the headlights? THey're so inexpensive that I'm skeptical of their build quality and performance.
Well, the pictures are there in the how to thread I wrote. And if you read this thread, it will tell you all about Joesph and xenonrider.com and his product and customer service. It will be money well spent.
http://www.vehicross.info/forums/sho...&highlight=HID
Sold...
I'll order the Bi-Xenon kit tomorrow.
And then I'll work on the Micro DEs shortly there after.
Thanks guys!!
I was able to bend the metal tabs that keep the bulbs in there on the Micro DE's to hold the bulbs on there (obviously didn't do that great of a job though). I have to redo it as soon as I can so I will take some photos next time I have the bumper off.Quote:
Originally Posted by rowhard