Bearings-Snap ring won't fit

So, I'm in the middle of the project.

Replaced inner and outer bearings, races, and inner seal.

Puting it all back together and the snap ring won't quite go back on. No matter how much I torque things down, it seems like I need just 1/100th inch more to get the snap ring to hit the groove. I can't seem to make that happen.

I've taken it all apart, and tried again. Everything seems to be seated correctly...confused and now the VX sits up on blocks.

Any ideas?

Thanks,
Bim

Hey, Bimati...you work this out yet? Wayne

Well, the replacement races were .5mm too deep...just enough to cause the snap ring not to fit. I did a touch of filing on the ring, and it finally popped in. Hopefully that will do the trick. First drive will be tonight.

Haven't done this yet, so can't help. Good luck!

Just curios, who did you buy from and what brand so I know not to do the same?

The originals were French jobbies, the replacements from Autozone were German jobbies.

I'll have to check the specific brand and I'll see if I can rescue the boxes to get you more information....stay tuned!!!

Bim

Drive it for about a hundred miles, then remove the front wheels/calipers & re-check the bearing tension with your scale thingy again after the bearings/races have seated.
Just a thought worth two cents...but only in Larryland. ;)

Will do, Pickles. Thanks for the tip Uncle Dub.

Bim

Now I am curious. I am getting my front bearings repacked and when I went to the dealer they said all I need are new seals. I bought two OEM Japanese made seals and that's it.

I am taking my VX in to have the brakes and rotors replaced and the front bearings repacked. Aside from the seals, should I have some other parts/hardware for them to do the job right?

Thanks- Bart

While they are repacking the bearings, have them look at the bearings and races for wear.....it would be a good time to replace those if they need it. If not, repack and carry on your merry way.

Bim

OK, cool. How many miles are you at?

Bart

Quote:

---

Originally Posted by Bimati

While they are repacking the bearings, have them look at the bearings and races for wear.....it would be a good time to replace those if they need it. If not, repack and carry on your merry way.

Bim

---

94K, b*tches!!!

Bought it almost a year ago with 56K on it!!!!!!!!!!!!

Woooooooooooooooooo!!!!!!!!!!!!

I LOVE drivin my VX!!!!!!!!!!!!!!!!!


WWWWWWWOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!

Oooooh, you like that, don't ya!!!!!!!!!!!!!

WWWWooooooooo HOOOOOOOOOOOoooooo!!!!!!!!!

Bim