LittleBeast
08/20/2006, 07:49 PM
Here are the pictures of the stock reflector to LED brake light conversion I did some time ago.
http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_078.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_078.jpg)http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_077.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_077.jpg)http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_090.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_090.jpg)http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_088.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_088.jpg)
Also all the parts are found on ebay very easily you will just need three items per side (light)
-LED light http://cgi.ebay.com/ebaymotors/Maxxima-Red-LED-Marker-lights-2-inch-Round_W0QQcmdZViewItemQQcategoryZ50466QQihZ002QQit emZ4578832394QQtcZphoto
-Rubber mounting grommet http://cgi.ebay.com/ebaymotors/2-Black-Round-Rubber-Grommet-by-Truck-Lite_W0QQcmdZViewItemQQcategoryZ50466QQihZ002QQite mZ4531743398QQtcZphoto
-Wiring harness http://cgi.ebay.com/ebaymotors/2-Wire-Pigtail-for-LED-marker-lights-Premium_W0QQcmdZViewItemQQcategoryZ50466QQihZ002QQ itemZ4507873642QQtcZphoto
This is very easy to do the stock reflectors do have a bolt and nut holding them on but after that and a 2-1/2" hole drill it is as easy as connecting two wires to the original brake light lines.
In Christ,
Ryan H
USA Decathlon Team
http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_078.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_078.jpg)http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_077.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_077.jpg)http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_090.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_090.jpg)http://www.vehicross.info/gallery/data/515/thumbs/08-10-06_088.jpg (http://www.vehicross.info/gallery/data/515/08-10-06_088.jpg)
Also all the parts are found on ebay very easily you will just need three items per side (light)
-LED light http://cgi.ebay.com/ebaymotors/Maxxima-Red-LED-Marker-lights-2-inch-Round_W0QQcmdZViewItemQQcategoryZ50466QQihZ002QQit emZ4578832394QQtcZphoto
-Rubber mounting grommet http://cgi.ebay.com/ebaymotors/2-Black-Round-Rubber-Grommet-by-Truck-Lite_W0QQcmdZViewItemQQcategoryZ50466QQihZ002QQite mZ4531743398QQtcZphoto
-Wiring harness http://cgi.ebay.com/ebaymotors/2-Wire-Pigtail-for-LED-marker-lights-Premium_W0QQcmdZViewItemQQcategoryZ50466QQihZ002QQ itemZ4507873642QQtcZphoto
This is very easy to do the stock reflectors do have a bolt and nut holding them on but after that and a 2-1/2" hole drill it is as easy as connecting two wires to the original brake light lines.
In Christ,
Ryan H
USA Decathlon Team