morgan-tec
01/29/2005, 09:59 PM
Well today i was walking round Autozone and i was a little bored at the time. So i found a little side project. I bought some inexpensive aluminum pedal covers for $15. They started out as polished flames on a matte backround, well a few hours later they were white powdercoat with aluminm flames on them. Since the flames are comming soon for the exterior i thought i would add a small touch inside. The brake was easy just drill some holes and bolt them in place, but the gas was a little different. The stock pedal was nothing more than a plastic pedal snapped on to a steel rod. So i welded on a small steel pad and then bolted on my pedal. I am pleased with what i came up with due to my bordem, what do you all think?
http://img.villagephotos.com/p/2003-5/195531/pedals1.jpg
http://img.villagephotos.com/p/2003-5/195531/pedals1.jpg