PDA

View Full Version : More info about Tone's Cameras?



nater
09/28/2004, 03:12 PM
Tone (or others) do you have more info about the cameras you have for sale? Dimensions? more photos? Viewing angle? NTSC format? Wiring? (Length? voltage? pinouts)? Environmental conditions? (Freezeproof? Waterproof?) Nightvision?


Nate

Tone
09/28/2004, 03:58 PM
Fits the VX after looking years for the right camera that fits without
ANY mode of the crescent other than removing the rectangular plastic piece already there for this use - Infrared cameras usually require some modification of the crescent. Cable is plenty long to reach from the back of the VX to the dash or rear view mirror and offers mirroring capability depending on your screen input.
I have 2 of these on my VX, one rear view in the crescent that activates automatically when I select Reverse or when using my turn signals. It and the front camera can be switched on manually as well by the head unit. I also have these installed on a buddies repo tow truck that he uses for night snags when he does not want to turn on his flood lights. Sees in almost total darkness.

0.02 Lux CCD Color Camera
MODEL NO RV-C-32
IMAGE SENSOR 1/3" inch CCD Image Sensor
CCD EFFECTIVE PIXELS NTSC 537(H)*505(V) / PAL 537(H)*597(V)
SCANNING SYSTEM NTSC 525 lines, 60 fields/sec / PAL 625 lines, 50 fields/sec
SYNC SYSTEM Internal
MINIMUM ILLUMINATION 0.02 Lux
VIEW ANGLE 150
RESOLUTION 380TVL / 470TVL (Enhanced)
SIGNAL TO NOISE RATIO 52dB(MIN) / 60dB(TYP) (AGC OFF)
WHITE BALANCE ATW/AWB/FIX SWITCHABLE (Zero color rolling)
WHITE BALANCE RANGE 3200---15000K (2200-15000K with S Filter)
AUTO IRIS A.E.S
ELECTRONIC SHUTTER NTSC 1/60~1/120000sec / PAL 1/50~1/120000sec
VIDEO OUTPUT 1.0V p-p composite video at 75 ohm
GAMMA CORRECTION 0.45
MIRROR FUNCTION ON/OFF wirecable switchable
GAIN COMTROL AGC
OPERATION TEMPERATURE -20C TO 50C
POWER SUPPLY DC12V / 120mA
WATERPROOF YES
VARIABLE MODELING Drilled Type & Mounted Type Multi-Function Design
EXTERNAL SIZE (CM) 58W x 44H x 43D
PATENT COUNTRY China & Taiwan

Tone
09/29/2004, 07:09 AM
0.5 LUX CCD Color Camera
MODEL NO RV-C-M
IMAGE SENSOR 1/4" inch CCD Image Sensor
CCD EFFECTIVE PIXELS NTSC 512(H)*492(V) / PAL 512(H)*582(V)
SCANNING SYSTEM NTSC 525 lines, 60 fields/sec / PAL 625 lines, 50 fields/sec
SYNC SYSTEM Internal
MINIMUM ILLUMINATION 0.5 Lux, F1.2
VIEW ANGLE 130(Diagonal; 110 (H); 69 (V)
RESOLUTION 380TVL / 470TVL (Enhanced)
SIGNAL TO NOISE RATIO 52dB(MIN) / 60dB(TYP) (AGC OFF)
WHITE BALANCE Auto high speed white balance (Zero color rolling)
WHITE BALANCE RANGE 3200---15000K (2200-15000K with S Filter)
AUTO IRIS A.E.S
ELECTRONIC SHUTTER NTSC 1/60~1/120000sec / PAL 1/50~1/120000sec
VIDEO OUTPUT 1.0V p-p composite video at 75 ohm
GAMMA CORRECTION 0.45
MIRROR FUNCTION ON/OFF wirecable switchable
GAIN COMTROL AGC
OPERATION TEMPERATURE -20C TO 50C
POWER SUPPLY DC12V / 120mA
WATERPROOF YES
VARIABLE MODELING Drilled Type & Mounted Type Multi-Function Design
EXTERNAL SIZE (CM) 58W x 33H x 43D
PATENT COUNTRY China & Taiwan

TechnoPope
12/16/2004, 09:18 PM
Tone,
Do you have any pictures of your "mod free" camera installation?

Tone
12/17/2004, 07:54 AM
I thought I had posted before but not sure why - will remove the crescent this weekend for a pic of the actual mount - only drilling required is 2 small screws to mount the base of the camera to the metal inside the crescent. Here is one from the outside (my opening nicked due to fitting many different windows to protect old non waterproof cameras) - new camera covers are black BTW:

jayfotos
12/21/2004, 11:34 AM
Looks like you can stick your finger in that hole, waterproof? Sure, maybe the camera but it looks like water can enter and build up into the rear door.

MZ-N10
12/21/2004, 07:01 PM
i have one of tones cameras, and i took a slighty approach to install it

http://www.vehicross.info/gallery/data/500/624p1010002800600-med.jpg
________
Infants Zoloft (http://www.classactionsettlements.org/lawsuit/zoloft/)

TechnoPope
12/22/2004, 07:49 PM
MZ-N10, I am about to install one of Tone's cameras. Would you please post or PM me with a picture of the back of your installation along with any install info you care to share? Thanks in advance.