Round lights?

[ipd]

Need a good recommendation for plug/play friendly LED lights to replace the stock crap in my front bumper. Anyone have any ideas?

[Igor]

Do you need the entire light assembly replaced or just the bulb? You can buy the 194 LED bulbs from Auto Zone. I installed them in mine and they work just fine

[ipd]

I'm more looking for an entire LED replacement fixture--preferably one with halos. But it's good to know they're 194's. Someday i'll get around to changing them.

[arcobarco]

Im looking to see if these are a possible replacement worn minimal modification.
http://www.nordiclights.com/start-english/products?versionId=1024

[lito3737]

/gallery/data/515/medium/DSCN0017b.jpg


http://www.vehicross.info/gallery/showphoto.php?photo=26110&title=dscn0017b&cat=515

[lito3737]

.

[ipd]

Yep. something like that. I'm content with the other lights, I just want something for those round ones.

[Jeffbarnett]

I’ll be attempting these (https://www.theretrofitsource.com/assemblies/led-fog-lights/universal-70mm-morimoto-xb-led.html) soon, along with a handful of other lighting upgrades. I’ll post updates as the project goes along. Tape measure and some hold-em-up-enometry says it shouldn’t be too difficult, but we’ll see!

[MSHardeman]

Moncha did a write up a long time ago (can't seem to find it right now) on how to install some Hella Micro DE lights in the round running light holes. I used that write up and some personal "engineering" to install a set of Xenon projector beam lights with angel eye rings on them. Here is a picture of Vicki with the old angel eye lights in place (I have since replaced these with the projector beams): http://www.vehicross.info/gallery/showphoto.php?photo=10448&title=angel-eyes-08&cat=500 http://www.vehicross.info/gallery/showphoto.php?photo=15001&title=angel-eyes-1&cat=500

Basically ended up fabbing a mount to hold the light at the proper height and mounted that to the top of the turn signal recess. It is very thick plastic and it's pretty stable even on Moab trail runs.

I may have some pictures of my install lying around that I'd be happy to post if you think they would help.