PDA

View Full Version : Grinding while turning with body roll



JHarris1385
05/16/2014, 05:36 AM
So I am getting a grinding noise as the title says while turning and it is louder while there is a little body roll into the turn.

- What is this? - Bearing?

- I have just recently installed the surtrak axles

JHarris1385
05/16/2014, 08:15 AM
specifically the driver side when turning right

rowhard
05/16/2014, 09:25 AM
specifically the driver side when turning right

Do you feel it or hear it and if feel it, then in the steering wheel, console, or seat of the pants:confused:

Marlin
05/16/2014, 09:58 AM
It does sound like wheel bearings.

Triathlete
05/16/2014, 01:25 PM
You can check the front wheel bearings pretty easily. Jack up front wheel and try moving it top to bottom. If you have any play bearings are bad or preload needs adjusted.

Ang
05/17/2014, 02:30 PM
Where would one purchase wheel bearings+ pinion bearings (inner and outer)+ seals?

JHarris1385
05/21/2014, 04:58 AM
Of course my mechanic could not replicate the noises. So he returned it.

He did think that maybe my tire(s) have started to rub? Had them on for 2+ years now.

cheetah2390
05/21/2014, 06:09 AM
I am actually going to be replacing my CV shafts soon, mechanic said they will need to be replaced. He said I will know if it goes bad because it will be a noticeable grinding noise. We noticed they were going bad while repacking the bearing. We will also be replacing bearing at the same time. So maybe have him check your CV shaft.

Here is a thread I started about replacing them:
http://vehicross.info/forums/showthread.php?threadid=25616

JHarris1385
05/21/2014, 07:11 AM
I just replaced them with surtracks less than a year ago

cheetah2390
05/21/2014, 10:22 AM
I just replaced them with surtracks less than a year ago

oh sorry I missed that from above