PDA

View Full Version : re-badging



pbkid
06/27/2009, 08:30 PM
hey guys, so i looked around but not much luck.

so the clear coat/chroming on my vehicross and Isuzu emblems are starting to peel...
personally im not a fan of debadging as im a fan of being proud of my Isuzu...

what i would like to do is paint those emblems black and re-apply them. however i know that whatever they are stuck on there with will come off as they peel off, so my question is, what can i apply to them to get them to stick back on my VX for the long run??

any ideas?? i was thinking of a thin 2-sided tape, but i dont want the emblems to stick off the body...i want it to look factory ;) (i know, the only thing on my VX factory lol)

don moore
06/27/2009, 08:59 PM
3m auto trim adhesive
http://www.toolrage.com/ProdImages/3m-6383.jpg

Gussie2000
06/27/2009, 09:00 PM
I'm on the same boat like you.

I may be wrong,but the aftermarket chrome tape that is applied on the door sill pillar can do the re-chrome over the peeled letters with a bit of dedication & patient you can achieved the desired chrome look again.

About re-applying the letters on the fenders probably cement glue can do the trick.