What do I tighten the torque screws with?

[VX crazy]

Just wondering, I have tried several things but nothing works for the screws that hold on the cladding, not sure if they are called torque screws. Anyone know what and what size?????

[VehiX]

I had a regular shaped allen wrench that did the job just fine!

Be careful though , as you can strip them. Tighten them up as tight as possible with out it just spinning around with no tension.

Use a regular style allen wrench that fits, take it slow and you'll be fine :)

[VX crazy]

:rollo2: I have tried allen wrench etc, just need to know the size to get, the ones I have don't fit, would prefer the torque wrench but just not sure what size.

[WormGod]

They "ARE" called torx screws and you can get torx sockets for a socket wrench that will work fine. There are more torx screws on the VX than just the cladding, so a set might be a good thing to have if you are the do-it-your-selfer.

[VX crazy]

:goof: Alright, thanks, I knew what they are but have a few of the wrong size, I will just get a set.

[Navigator]

Torx wrenches :D

[Daver]

I highly recommend a good bit set with a flexible driver and a magnetic bit extention to go with it. That one tool is so versatile, I use it more than any other.

Here's one from Sears for $10. Hard to beat that package. It's not Craftsman, so no lifetime warranty.

Sears item# 00930544000

http://www.sears.com/data/product_images/tools/large/00930544000-dlv.jpg

My set came with a driver more like this one, though: (item 00930561000)

http://www.sears.com/data/product_images/tools/large/00930561000-dlv.jpg

For interior screws and such, a tight angle bit ratchet like this one makes that kit even more useful (item 00941716000)

http://www.sears.com/data/product_images/tools/large/00941716000-dlv.jpg
-Daver

[VX crazy]

;Dp; Thanks Daver, That looks like exactly what I need. I can relate to pictures!!